Brayer BR4884 Инструкция по эксплуатации онлайн [9/76] 811661
![Brayer 2000 Вт, напольный, электронный, ударопрочное стекло BR4884 Инструкция по эксплуатации онлайн [9/76] 849829](/views2/2043531/page9/bg9.png)
9
EN
• To avoid mains overloading, do not switch on several
electrical appliances with high power consumption at
the same time.
• Insert the power plug into the mains socket.
REMOTE CONTROL (RC)
The control buttons on the remote control are similar to
the control buttons on the control panel (3).
Attention! A lithium battery is used in the remote
control. Prevent children from swallowing the lithium
battery. If your child has swallowed a battery, seek
immediate medical advice.
• Press the latch on the side and remove the battery
holder (30), install a CR2025 battery, strictly following
the polarity.
• Install the battery holder (30) to its place.
Notes:
- If there is an insulating gasket in the RC battery
compartment, remove the gasket.
- replace the battery in time;
- do not recharge the lithium battery;
- remove the battery if you are not going to use the
appliance for a long time;
- remove the used battery from the remote control
(22) and dispose of it.
• When using the remote control, point it at the front of
the convection fan heater.
• The distance between the remote control and the
appliance should not exceed 5 m, the coverage angle
should be up to 30 degrees.
• Avoid direct sunlight on the remote control signal
receiver (14), otherwise false switching on of control
commands is possible.
BATTERY REPLACEMENT
• Remove the battery holder (30), remove the old
battery, install a new CR2025 battery strictly following
the polarity, install the battery holder (30) into the
remote control.
DESCRIPTION OF THE POWER BUTTON AND
THE BUTTONS ON THE CONTROL PANEL (3)
• Power switch (5) «ON/OFF». Set the switch (5) to
the «ON» position to power on the appliance. At the
end of operation, turn the appliance o by setting the
switch (5) to the «OFF» position.
Note: - operating mode buttons on the control panel (3)
are touch-sensitive, and it is enough to touch the button
to switch on the desired operating mode; each touch
of the active button will be accompanied with a sound
signal.
• On/O button (7) «
». Touch the button (7)
«
» once or press the button (23) « » on the
remote control (22) to turn on the convection fan
heater. To turn the appliance o, touch the button (7)
«
» again or press the button (23) « ».
Похожие устройства
- Brayer BR3009 Инструкция по эксплуатации
- Brayer BR3136 Инструкция по эксплуатации
- Brayer BR3135 Инструкция по эксплуатации
- Brayer BR3134 Инструкция по эксплуатации
- Brayer BR3337 Инструкция по эксплуатации
- Brayer BR3336 Инструкция по эксплуатации
- Brayer BR3334 Инструкция по эксплуатации
- Brayer BR3736 Инструкция по эксплуатации
- Brayer BR3735 Инструкция по эксплуатации
- Brayer BR3732 Инструкция по эксплуатации
- Brayer BR3733 Инструкция по эксплуатации
- Tanita BC-545N Инструкция по эксплуатации
- Tanita BC 545N Руководство по эксплуатации
- Vitek VT-1829 Инструкция по эксплуатации
- Vitek VT-1842 Инструкция по эксплуатации
- Vitek VT-1830 Инструкция по эксплуатации
- Vitek VT-1828 Инструкция по эксплуатации
- Vitek VT-2352 Инструкция по эксплуатации
- Vitek VT-2626 Инструкция по эксплуатации
- Vitek VT-2628 Инструкция по эксплуатации