Brayer BR6300 Инструкция по эксплуатации онлайн [8/52] 813237
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Brayer BR6300 Инструкция по эксплуатации онлайн [8/52] 813237

Brayer BR6300 Инструкция по эксплуатации онлайн [8/52] 813237
8
EN
• The presence of refrigerant creates a hazard
for anyone other than service personnel when
performing maintenance or repairs on this unit.
• Avoid damaging the cooling circuit. If a signicant
refrigerant leak is detected, immediately disconnect
the ice generator from the electrical network by
unplugging the power cord from the mains socket,
open windows and doors to ventilate the room, do
not smoke or use open ames, contact the service
center.
• Do not repair the unit by yourself. Do not
disassemble the unit by yourself, if any malfunction
is detected, and after it was dropped, unplug the unit
and apply to the service
• center.
• Transport the ice generator in its original packaging
in an upright position.
• Store the unit upright and out of the reach of children
and people with disabilities.
THE UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY; USING THE UNIT FOR COMMERCIAL OR
LABORATORY PURPOSES IS PROHIBITED.
BRIEF DESCRIPTION OF THE ICE GENERATOR’S
OPERATING PRINCIPLE
- The operating principle of the ice generator is
similar to the operation of a refrigerator, but with
some changes.
- The main parts and components of the ice
generator include: compressor, evaporator (6),
condenser, water pump.
- The compressor pumps refrigerant, which
is cooled by the radiator and fan to ambient
temperature, and then, leaving the capillary
channel, it expands and its temperature drops
below zero.
- Water is pumped into the evaporator (6) using a
pump; as a result of cooling, the water freezes
on the surface of the evaporator (6) within 7-15
minutes forming ice. The time it takes for water to
freeze depends on the ambient temperature and
the temperature of the water in the ice generator
tank.
- As soon as the ice freezes, the ice tray (7) tilts
back and the remaining water from the tray is
drained back into the tank (9). To separate the
ice from the evaporator, hot steam is directed at
it; as a result, the ice is easily separated from the
evaporator and falls into the basket.
- After this, the ice tray (7) automatically returns to
its position under the evaporator (6) and the next
ice freezing cycle begins.
- To prevent the ice basket from overowing, the
unit has an infrared sensor for lling the basket;
if you take a certain amount of ready-made ice
from the basket, the ice generator starts a cycle of
preparing a new portion of ice until the basket is
instr BR6300.indd 8instr BR6300.indd 8 06.05.2024 10:51:3806.05.2024 10:51:38

Похожие устройства

Скачать