Ada : лазерный уровень TopLiner 3-360 Set + дальномер Cosmo 50 А00547 PDF-инструкция онлайн [7/24] 814939

7English

TO CHECK THE ACCURACY OF LINE LASER (SLOPE OF PLANE)

Place line laser on the tripod 5m away from the wall so the horizontal laser

line will be directed to the wall. Switch on the power. The line laser starts

to self-level. Mark point A on the wall to show the contact of laser beam

with the wall. Turn the line laser by 90° and mark points В, С, D on the wall.

Measure distance “h” between the highest and lowest points (these are A

and D points in the picture).If “h”is ≤ 6 mm, the measurement accuracy is

good. If “h” exceeds 6 mm, apply service center.

TO CHECK PLUMB

Choose a wall and set laser 5 m away from the wall. Hang a plumb with the

length 2.5 m on the wall. Turn on the laser and make the vertical laser line

meet the point of the plumb. The accuracy of the line is in the range if the

vertical line doesn’t exceed (up or down) the accuracy that is shown in the

specifications (e.g. ±3 mm/10 m). If the accuracy isn’t corresponding with

claimed accuracy, contact the authorized service center.

PRODUCT LIFE

Product life of the tool is 7 years. The battery and the tool should never

be placed in municipal waste. Date of production, manufacturer’s contact

information, country of origin are indicated on the product sticker.

CARE AND CLEANING

Please handle line laser with care. Clean with soft cloth only after any use.

If necessary damp cloth with some water. If instrument is wet clean and

dry it carefully. Pack it up only if it is perfectly dry. Transport in original

container/case only.