Ada : лазерный уровень PROLiner 4V + дальномер Cosmo MINI + штатив Elevation 16B + рулетка RubTape 5 А00549 PDF-инструкция онлайн [7/24] 814946

7English

turn on the laser and make the vertical laser line meet the point B, along

the vertical laser line on the wall and measure the distance 3m from point

B to another point C. Point C must be on the vertical laser line, it means the

height of C point is 3m.

Measure the distance from point A to point C, if the distance is over 2 mm,

please, contact with seller to calibrate the laser.

PRODUCT LIFE

Product life of the tool is 7 years. The battery and the tool should never

be placed in municipal waste. Date of production, manufacturer’s contact

information, country of origin are indicated on the product sticker.

CARE AND CLEANING

Please handle line laser with care. Clean with soft cloth only after any use.

If necessary damp cloth with some water. If instrument is wet clean and

dry it carefully. Pack it up only if it is perfectly dry. Transport in original

container/case only.

Note: During transport On/O compensator lock (5) must be set to posi-

tion “OFF”. Disregard may lead to damage of compensator.

SPECIFIC REASONS FOR ERRONEOUS MEASURING RESULTS

• Measurements through glass or plastic windows;

• Dirty laser emitting window;

• After line laser has been dropped or hit. Please check the accuracy;

• Large uctuation of temperature: if instrument will beused in cold areas

after it has been stored in warm areas (or the other way round) please wait

some minutes before carrying out measurements.