Contracor BlastRazor Z-200 10400200 Инструкция по эксплуатации онлайн [7/32] 815037

CONTRACOR

BlastRazor Z-100, BlastRazor Z-200 Art. 10400100/10400200

3.2. Abrasive blasting operations.

1. Feed compressed air to the machine inlet.

ATTENTION!

MACHINE MAXIMUM OPERATING PRESSURE — 10 bar.

2. Close the pressurizing ball valve.

3. Upon the signal of the abrasive blasting operator open the ball valve and feed

compressed air into the machine line. The tank is pressurized. Only compressed air is

expelled from the nozzle.

4. Adjust metering valve FSV to provide optimal air-abrasive mixture. The general rule for

abrasive blasting operations: the less abrasive you use, the better.

5. To stop operation close the compressed air feed ball valve and immediately open the

pressurizing ball valve to relieve pressure in the tank.

3.3. Abrasive blasting operation shut-down.

1. Remove the remains of abrasive from the tank. To do this disconnect the nozzle

and point the hose into a suitable container for the abrasive remains. Close the

pressurizing ball valve and open compressed air feed ball valve.

2. If upon completion of operation the machine is left outside you should cover it with

plastic lm to avoid ingress of moisture into the tank.