Home
Главная
IMS
Споттеры
SPOT 2700 -230V 055360
Инструкция Страница: 11

IMS SPOT 2700 -230V 055360 Инструкция онлайн [11/60] 816328

Precautions mu be taken when welding in small areas, and the operator will need supervision from a safe diance. In addition, the

welding of certain materials containing lead, cadmium, zinc, mercury or beryllium may be particularly harmful.

Also remove any grease on the metal pieces before welding. Do not weld in areas where grease or paint are ored.

FIRE AND EXPLOSION RISKS

Protect the entire welding area. Flammable materials must be moved to a minimum safe distance of 11 meters.

A re extinguisher must be readily available near the welding operations.

Keep people, ammable materials/objects and containers that are under pressure at a safe diance.

Welding in closed containers or pipes should be avoided and , if they are opened, they mu be emptied of any ammable or explosive

material (oil, fuel, gas ...).

Grinding operations should not be carried out close to the power supply or any ammable materials.

ELECTRICAL SAFETY

The electrical mains used must have an earth terminal. An electric shock could cause serious injuries or potentially

even deadly accidents.

Never make contact with live parts inside or outside the current source (cables, electrodes, arms, guns...) as they are connected to

the welding circuit.

Before opening the device, it is imperative to disconnect it from the mains and wait 2 minutes, so that all the capacitors are discharged.

Damaged cables and torches mu be changed by a qualied and skilled professional. Make sure that the cable cross section is ade-

quate with the usage (extensions and welding cables). Always wear dry clothes which are in good condition in order to be isolated

from the welding circuit. Wear insulating shoes, regardless of the workplace/environment in which you work in.

EMC CLASSIFICATION

This Class A machine is not intended to be used on a residential site where the electric current is supplied by the

domestic low-voltage power grid. There may be potential diculties in ensuring electromagnetic compatibility at

these sites, due to conducted interferences as well as radiation.

EN 61000-3-11

This equipment complies with the IEC 61000-3-11 standard.

This equipment does not comply with IEC 61000-3-12 and is intended to be connected to domestic low-voltage

systems interfacing with the public supply only at the medium- or high-voltage level. If it is connected to a public

low-voltage power grid, the installer or user of the machine has to ensure, by checking with the network operator,

that the device can be connected.

ELECTROMAGNETIC INTERFERENCES

The electric currents owing through a conductor cause electrical and magnetic elds (EMF). The welding current

generates an EMF around the welding circuit and the welding equipment.

The EMF electromagnetic elds can interfere with certain medical implants, such as pacemakers. Protection measures mu be taken

for people having medical implants. For example, access rerictions for passers-by or an individual risk evaluation for the welders.

Each welder mu follow the procedures below in order to minimise exposure to electromagnetic generated by the welding circuit:

• position the welding cables together - rap them if possible;

• keep your head and top half of the body as far from the welding circuit as possible;

• never enrol the cables around your body;

• never position your body between the welding cables. Hold both welding cables on the same side of your body;

• connect the earth clamp as close as possible to the area being welded;

• do not work too close to, do not lean and do not sit on the welding machine

• do not weld when you’re carrying the welding machine or its wire feeder.

People wearing pacemakers are advised to consult their doctor before using this device.

Exposure to electromagnetic elds while welding may have other health eects which are not yet identied.

RECOMMENDATIONS FOR EVALUATING THE WELDING AREA AND INSTALLATION

Miscellaneous

The user is responsible for the correct inallation and usage of the welding material based on the inructions supplied by the

manufacturer. If electromagnetic diurbances are detected, it is the user’s responsibility to resolve the situation with the manufacturer’s

technical assiance. In some cases, this corrective action may be as simple as earthing the welding circuit. In other cases, it may be

necessary to conruct an electromagnetic shield around the welding power source and around the entire piece by tting input lters.

In all cases, electromagnetic interferences mu be reduced until they are no longer inconvenient.

SPOT 2600 / 2700 / 3900 - 230 V

3900 - 400 V / PRO 230 V/ PRO 400 V

Translation of the original instructions

IMS SPOT 2700 -230V 055360 Инструкция онлайн [11/60] 816328

Похожие устройства