Home
Главная
Karcher
Электрические
HDS 5/11 U 1.064-900
Инструкция к Karcher HDS 5/11 U 1.064-900 Страница: 15

Karcher HDS 5/11 U 1.064-900 Инструкция к Karcher HDS 5/11 U 1.064-900 онлайн [15/270] 816854

Karcher HDS 5/11 U 1.064-900 Инструкция к Karcher HDS 5/11 U 1.064-900 онлайн [15/270] 816854

– 3

Note: The EASY!Lock system joins com-

ponents with a quick-fasten thread solidly

and securely with just one turn.

 Insert the high pressure nozzle onto the

spray lance.

 Install union nut and hand-tighten it

(EASY!Lock).

 Join the spray lance with the trigger gun

and tighten until hand-tight

(EASY!Lock).

 Join the high-pressure hose with trigger

gun and high-pressure connection of

the appliance and tighten until hand-

tight (EASY!Lock).

몇 WARNING

Risk of injury! Appliance, accessories, sup-

ply lines and connections must be in fault-

free condition. If they are not in a perfect

state then the appliance must not be used.

 DANGER

Danger of injury by electric shock.

– It is imperative to connect the appliance

to the electric mains by means of a plug.

It is forbidden to permanently connect

the appliance to the power supply. The

plug serves for the disconnection from

the mains.

– The plug and coupling of the extension

cable used must be watertight.

– Use an extension cable with protective

earth conductor (protection class 1) and

an adequate cross section (see "Tech-

nical data") und fully uncoil it from the

cable drum.

For connection values, see type plate/tech-

nical data.

 Unwind the mains cable and place it on

the floor.

 Insert the mains plug into a socket.

몇 WARNING

Observe regulations of water supplier.

According to applicable regula-

tions, the appliance must never be

used on the drinking water net

without a system separator. A suit-

able system separator by KÄRCHER or al-

ternatively a system separator according to

EN 12729 type BA must be used.

Water that was flowing through a system

separator is considered non-drinkable.

몇 CAUTION

Always connect the system separator to

the water supply, never directly to the appli-

ance!

For connection values refer to technical

specifications.

 Connect the supply hose (min. length

7.5 m, minimum diameter 1/2“) to the

water connection point of the machine

and at the water supply point (for e.g. a

tap).

Note:

The supply hose is not included.

 Open the water supply.

 Screw the suction hose with filter (option-

al accessory) to the water connection.

 Appliance ventilation:

Unscrew the nozzle from the spray

lance.

Switch on the appliance and let it run

until the water exiting is bubble-free.

Let the appliance run for 10 seconds –

then switch off the appliance switch.

Repeat the procedure several times.

 Switch off the appliance and fit the noz-

zle again.

Before Startup

Attaching the Accessories

Start up

Electrical connection

2.

1.

Water connection

Connection to the water supply

Drawing in water from open reservoirs

15EN

Похожие устройства