Atlanta ATH-6191 silver Инструкция по эксплуатации онлайн [6/24] 818158

INSTRUCTION MANUAL

SCALES OPERATION

1. Place scale onto solid, steady, horizontal surface.

2. Push the switch on button (D). Wait few seconds until scales reset to zero

sensors indications and self-testing operation.

3. Enter the clock adjustment mode «T-SET». When the display starts flashing, set

the time using the « » buttons. Pay attention to the selection of the «AM/PM» time

of day symbols. Press «T-SET» to confirm the settings.

4. Set the weight on the scale platform and the display will display the weight in

the specified units. Distribute the load evenly in relation to the center of the weight

platform.

5. The scales are equipped with a function of zero weight. When weighing up to

200 g. the display shows the «ZERO» function symbol - . If the weight is more than

200 g. the «TARE» function symbol- is displayed . After the display has reset to zero,

place the container on the platform and then press the « ZERO/TARE» button (G),

the display will reset to zero again, and you can continue weighing without taking

into account the container. However, the maximum weight allowed for weighing will

be reduced by the tare weight. You can also set the container before turning on the

scale, the weight of the container in this case will also not be taken into account.

6. Scales designed for weighing the weight to 5 pounds. If the indicator is

overweight, it will display an error. If you use a bowl or other weighing device and

reset its weight to zero, the maximum allowed weight will be reduced by the weight

of this bowl.

7. To change the units of weight measurement, press «UNIT»button. Hold the

button for 3 seconds to change the units of measurement «kg/ld: oz».

With a short click on the button, you can change the weight unit symbols - «kg/

ld:oz», as well as the volume unit symbols – «ml/fl»oz».

8. The Scale has a built-in thermometer. Temperature range from 0 to ~+40 C°.