STATUS JS550 4191001 Инструкция к товару онлайн [3/29] 819588
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

STATUS JS550 4191001 Инструкция к товару онлайн [3/29] 819588

STATUS JS550 4191001 Инструкция к товару онлайн [3/29] 819588
4 5
1. GENERAL SAFETY RULES 2. JIGSAW SAFETY WARNINGS
that have the switch on invites accidents.
• Remove any adjusting key or wrench before turning the power tool on.
A wrench or a key left attached to a rotating part of the power tool may result in
personal injury.
• Do not overreach. Keep proper footing and balance at all times. This enables
better control of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewellery. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
• If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used.
Use of dust collection can reduce dust-related hazards.
POWER TOOL USE AND CARE
• Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the job better and safer at the rate for which it was
designed.
• Do not use the power tool if the switch does not turn it on and off. Any power
tool that cannot be controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or the battery pack from the
power tool before making any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce the risk of starting the
power tool accidentally.
• Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
• Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended
could result in a hazardous situation.
SERVICE
• Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power tool is
maintained
During operation provide eye protection to prevent eyes from exposure to
flying particles. Wear goggles.
Wear hearing protection during continuous operation. Intense noise loading
during operation may damage the operator’s hearing.
Take protective measures against inhalation of dust. Some materials can
contain toxic ingredients. Wear a dust mask and work with dust/chip extraction.
• Hold power tool by insulated gripping surfaces only, when performing an
operation where the cutting accessory may contact hidden wiring or its own
cord. Cutting accessory contacting a “live” wire may make exposed metal parts of
the power tool “live” and could give the operator an electric shock.
• Do not process materials containing asbestos. Asbestos is carcinogenic.
• Use of protective gloves is recommended.
WARNING: Before connecting a tool to a power source ensure that the voltage
supply is the same as the one specifed on the nameplate of the tool.
• A power source with a voltage greater than that specified for the tool can result in
serious injury to the user, as well as damage to the tool.
• If in doubt, do not plug in the tool.
• Using a power source with a voltage less than the nameplate rating is harmful to
the motor.
• Fully unwind cable drum extensions to avoid potential overheating.
• When an extension cable is required, you must ensure that it has the right ampere
rating for your power tool and it is in safe electrical condition.
WARNING: Always switch off and unplug the power tool prior to any
adjustment, servicing or maintenance or in case of mains drop-out.
• Use clamps or a vice to secure your work whenever possible.
• While operating the machine, always hold it firmly with both hands and provide for
a secure stance. The power tool is guided more securely with both hands.
• Do not operate the jigsaw without the fence set properly in its place.
• Keep hands away from the sawing range. Do not reach under the workpiece.
Contact with the saw blade can lead to injuries.
• Apply the machine to the workpiece only when switched on.
• When the cut is completed, switch the machine off and then pull the saw blade
out of the cut only after it has come to a standstill.
• Take care that the base plate rests securely on the material while sawing.
• Do not overload the machine: operate with moderate pressure. Overloading occurs
when you apply excessive pressure, resulting in decrease of motor speed, which
may cause inefficient operation and possible fault of the motor.
• Prior to sawing wood check the material for the presence of screws or nails and
remove them.
• Always keep the cord away from the working area of the power tool.
• Never use the machine with a damaged cable. Do not touch the damaged cable
JIGSAW SAFETY WARNINGS
EN
EN

Похожие устройства

Скачать