Home
Главная
Levenhuk
Метеостанции
Wezzer PLUS LP70 78897
Инструкция к товару Страница: 6

Levenhuk Wezzer PLUS LP70 78897 Инструкция к товару онлайн [6/40] 821692

Levenhuk Wezzer PLUS LP70 Weather Station

The kit includes: base station, rain gauge, USB cable, user manual, and warranty.

Also required (not included): 2 AA batteries for the rain gauge; 3 AAA batteries for the base station.

Caution! Please remember that mains voltage in most European countries is 220—240V. If you want to use your

device in a country with a dierent mains voltage standard, remember that use of a converter is absolutely

necessary.

Parts overview

Base station

• Connect the power cable to the device and the DC adapter (not included) via a USB plug and connect to

the AC power supply; or

• Open the battery compartment cover (8) and insert 3 batteries according to the correct polarity. Close

the cover.

NOTE! It is recommended to use an adapter for the continuous operation of the base station, although battery

power is also possible.

Rain gauge

• Turn the rain collector (2) counterclockwise

and open the top part of the rain gauge to

remove the cardboard inside, and then

reattach the rain collector by turning it

clockwise.

• Place the rain gauge upside down. Turn

the mounting ring (3) clockwise to open

the bottom part. Remove 3 screws on the

battery compartment cover (6). Grasp the

round handle in the middle to pull the

door out.

• Open the battery compartment cover (5) and insert 2 batteries according to the correct polarity.

• Reattach the battery compartment cover (6) and the mounting ring (3).

Rain gauge connection

• Place the base station and the rain gauge within the eective transmission range. Position the rain gauge

horizontally in an open area away from the trees or other obstructions so that rain falls naturally. You

may insert the three mounting screws (included) through the holes in the base of the rain sensor.

• If you have replaced the batteries, or would like to receive the updated readings, press and hold the CH

button for 5 seconds. You will see the "—" sign. It can take up to 3 minutes to receive the new readings.

Time setting

Press the MODE button and hold it for 3 seconds. The digits that are to be set are ashing. Press UP or DOWN

to change the value, and then press MODE to continue.

The setting order: 12/24h > Hours > Minutes > Year > Month > Date. Finally, press MODE to save the settings

and exit.

Alarm setting

Press the MODE button, and then press it again and hold it for 3 seconds. The digits that are to be set are

ashing. Press UP or DOWN to change the value, and then press the MODE button to continue.

The setting order: Hours > Minutes.

Press UP or DOWN to turn the alarm on or o.

Snooze/light function

• When the alarm rings, press SNZ/LIGHT to activate the snooze function. The alarm will sound again in

5 minutes.

• Press any button to silence the alarm until the set alarm time is reached again.

NOTE! In battery mode, the backlight turns on only for a short period of time.

Levenhuk Wezzer PLUS LP70 78897 Инструкция к товару онлайн [6/40] 821692

Похожие устройства