Home
Главная
Levenhuk
Оптические
DTX RC4 76824
Инструкция к товару Страница: 13

Levenhuk DTX RC4 76824 Инструкция к товару онлайн [13/57] 821777

Levenhuk DTX RC

Remote Controlled

Microscopes

Please refer to g. 1 (device), 2 (LCD screen), 3 (control panel), and 4 (accessories). Find your

microscope model and view all of the details of the device.

Getting started

• Unpack the microscope carefully and place it on a at surface.

• Use the supplied hardware to secure the pole and specimen holders to the base

using the supplied hardware.

• Install the LCD screen on the pole and tighten the locking screw.

• Plug the power cable into the corresponding connectors on the base and on the

LCD screen, and then the backlight and screen will turn on automatically.

• Press and hold the “Power on/o” button for 2 seconds on the screen to turn the

screen on and o.

A microSD card (purchased separately) is required to save captured images and recorded

videos. Turn the microscope o and insert the microSD card into the corresponding slot

on the microscope body until it locks in place with a click. Do not apply excessive force

when inserting the microSD card. Try rotating the card, if it does not lock in place with

ease.

If the LCD screen freezes, look for the “Reset” button on the back of the LCD screen. Use

a narrow object, such as a straightened paperclip, to press the button. This will reset all

of the settings to the factory defaults and restart the LCD screen. Saved photos or videos

will not be deleted.

UV lter

Use a 3M sticker to stick the UV lter and lens cover together. The threaded side of the

lter must be glued to the lens cover.

Application menu

Digital magnication

During observations, press the “Up” button to enlarge the image and the “Down” button

to reduce the image.

Capturing an image

1. Turn the microscope on and place a specimen on the stage.

2. Set the objective to the desired height using the coarse focusing knob.

3. Adjust the illumination brightness, so that the specimen is evenly lit.

4. Adjust the magnication and sharpness of the image by rotating the coarse focus

knob and optical zoom ring.

5. To take a photo, press the “Capture” button.

6. In “Freeze” mode, briey press the “OK” button to take a picture (except RC1).

Recording a video

1. Press the “Video” button to switch to video mode. The icon in the upper le corner

of the screen will change in conrmation.

2. Press the “OK” button to start recording. Note: do not hold down the “OK” button;

instead, briey press and release it.

3. Press the “OK” button again to stop recording.

4. Press the “Capture” button to take a picture while the microscope is recording a

video. If you take a photo this way, the image resolution may not be as high as the

video resolution – the image quality will be lower.

Caution: Please refer to the specications table for the correct mains

voltage and never attempt to plug a 110V device into 220V outlet and vice

versa without using a converter. Remember that mains voltage in the U.S.

and Canada is 110V and 220–240V in most European countries.

Video mode

Video recording

Photo mode

Capture an image

MicroSD status icon

Still image mode

Review mode

Levenhuk DTX RC4 76824 Инструкция к товару онлайн [13/57] 821777

Похожие устройства