Ryobi RMT300-SA 5133002446 Инструкция к товару онлайн [3/148] 822154
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Ryobi RMT300-SA 5133002446 Инструкция к товару онлайн [3/148] 822154

Ryobi RMT300-SA 5133002446 Инструкция к товару онлайн [3/148] 822154
Safety, performance, and dependability have been given
top priority in the design of your multi-tool.
INTENDED USE
The multi-tool is intended to be used only by adults who
have read and understood the instructions and warnings
in this manual and can be considered responsible for their
actions.
The multi-tool is intended to be used:
– for sanding and finishing metal, wood, plastic, or
similar materials using the sanding pad with the
shaped abrasive sheets provided
– for scraping and plunge-cutting into non-ferrous
metal, wood, plastic, plasterboard, etc. using the
provided metallic cutting blades
– for cutting holes in walls to accommodate switches
or power sockets
– for removing grouting from between ceramic tiles
The multi-tool is intended to be operated indoors in dry, well
illuminated and adequately ventilated conditions.
The multi-tool is not intended to be used on wet materials
or surfaces.
Do not use the product in any way other than those stated
for intended use.
WARNING
Read all safety warnings, instructions, illustrations
and specifications provided with this power tool.
Failure to follow all instructions listed below may result in
electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool’’ in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
MULTI-TOOL SAFETY WARNINGS
■ Always hold power tools by insulated gripping surfaces
only. The cutting accessory may contact hidden wiring
or its own cord. Cutting accessory contacting a “live”
wire may make exposed metal parts of the power tool
“live” and could give the operator an electric shock.
■ Always wear safety goggles while operating the tool.
Wear a dust mask when dust is produced.
■ The product will restart automatically if stalled.
WARNING
Dust from certain paints, coatings, and materials may
cause irritation or allergic reactions. Dust from wood
such as oak, beech, MDF, and others are carcinogenic.
Only qualifi ed specialists should be allowed to use the
product on materials containing asbestos.
WARNING
The product should never be connected to a power
supply when assembling parts, making adjustments,
cleaning, performing maintenance, or when not using
it. Disconnecting the product from the power supply
will prevent accidental starting that could cause serious
injury.
■ Keep mains lead clear from the working range of the
power tool. Always lead the cable away and behind
you.
■ When working in walls, ceilings or floors, take care to
avoid electric cables and gas or water pipes.
WARNING
Metallic accessories will become hot during use and
could result in skin burns if contacted by the operator.
Wear gloves when changing accessories. Take care
when setting down the tool between operations to
prevent damage or injury.
■ Do not use cutting accessories which are damaged,
cracked or do not fit securely to the product.
■ Whenever possible, fit the dust collection accessory
provided and connect it to a vacuum device to remove
dust from the work area and help prevent potential
respiratory irritation and damage to the tool.
■ The multi-tool creates vibrations which move the
accessory. The vibrations may cause discomfort if the
product is operated for long periods of time. Take a rest
often, especially if you feel discomfort in the arm, wrist,
or fingers. Choose a speed setting which will get the
work completed efficiently. Read the Residual Risks
and Risk Reduction sections for more information on
vibration-related injury.
ADDITIONAL SAFETY WARNINGS
■ Switch the device off immediately if the insertion tool
stalls! Do not switch the device on again while the
insertion tool is stalled, as doing so could trigger a
sudden recoil with a high reactive force. Determine why
the insertion tool stalled and rectify this, paying heed to
the safety instructions.
● The possible causes may be:
– it is tilted in the workpiece to be machined
– it has pierced through the material to be machined
– the power tool is overloaded
RESIDUAL RISKS
Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise and the operator
should pay special attention to avoid the following:
■ Injury caused by dust
– While using the product, considerable dust and fine
particles will be produced. Use the dust collection
device and connect a dust extraction vacuum
during use.
1 English |
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
EL

Похожие устройства

Скачать