Home
Главная
Bort
Электрические
BHR-2200-Pro 93411997
Мойка высокого давления BORT BHR-2200-Pro Страница: 8

Bort BHR-2200-Pro 93411997 Мойка высокого давления BORT BHR-2200-Pro онлайн [8/28] 822809

tion.

• The cross-section of any extension cables used must

be proportional to their length, i.e. the longer the ex-

tension cable, the greater the cross-section; cables with

a protection level of “IPX5” must be used.

• Position the high pressure cleaner AS NEAR POSSIBLE

to the water supply.

• Use the high pressure cleaner only with accessories

and replacement parts authorized by the manufacturer.

The use of original accessories and replacement parts

will ensure safe, trouble-free operation.

• Avoid unintentional firing of the trigger. Do not carry

the lance / trigger assembly with your hand over the

trigger. Always use the trigger lock mechanism.

• Ensure that the safety lock on the trigger is used,

when you have stopped using the pressure washer to

prevent accidental operation.

• Do not use the cleaner with inflammable or toxic liq-

uids, or any products which are not compatible with the

correct operation of the high pressure cleaner.

• Do not direct the water jet towards the unit itself,

electrical parts or towards other electrical equipment.

• Do not allow children or incompetent persons to use

the high pressure cleaner.

• Do not touch the plug and/or socket with wet hands.

• Do not use the high pressure cleaner if the electrical

cable is damaged.

• Do not use the high pressure cleaner if the high pres-

sure hose is damaged.

• Do not jam the trigger in the operating position.

• Check that the data plates are affixed to the high

pressure cleaner, if not, inform your dealer. Cleaners

without plates must NOT be used as they are unidenti-

fiable and potentially dangerous.

• Do not tamper with or alter the calibration of the safe-

ty valve.

• Do not alter the original diameter of the spray head

nozzle.

• Do not leave the high pressure cleaner unattended.

• Do not move the high pressure cleaner by pulling on

the electrical cable.

• All electrical conductors MUST BE PROTECTED against

the water jet.

• The high pressure cleaner MUST ONLY BE CONNECT-

ED to a correctly earthed power supply.

• The high pressure may cause materials to bounce off

surfaces at speed; therefore protective clothing and

safety goggles MUST BE WORN.

• Before doing work on the cleaner, REMOVE the plug.

• Before pressing the trigger, GRIP the gun firmly to

counteract the recoil.

• Maintenance and/or repair of electrical components

MUST be carried out by qualified staff.

• DISCHARGE residual pressure before disconnecting

the high pressure cleaner hose.

• Before using the high pressure cleaner, CHECK every

time that the screws are fully tightened and that there

are no broken or worn parts.

• Only USE detergents which will not corrode the coat-

ing materials of the high pressure hose/electrical cable

• ENSURE that all people or animals keep a minimum

distance of 16 yd. (15m) away.

ASSEMBLY

Please read the below Operation Instruction carefully

and follow it to avoid any problems when installing and

operating the appliance. Please go to the dealer for ex-

change if assembly fails for not-matching accessories.

1. Fixing the handle and cord hook with enclosed

screw and fixing foam canon hook. See figures 3 and 4;

2. Fixing the gun holder. See figures 5 and 6;

3. Connecting the water inlet hose to the water inlet

adapter. See figure 7 and 8;

4. Connecting the pressure hose to the unit. See fig-

ures 9 and 10;

5. Connecting the pressure hose to the gun handle.

See figures 11 and 12;

6. Connecting the gun lance to the gun handle. See

figures 13 and 14;

7. Turning the tap on, making sure that the tap is fully

open.

8. Triggering the gun to expel the air in the unit before

its working;

9. Turning the On/Off switch to the Off position. See

figure 15;

10. Putting plug into socket of main electric power.

Now, the pressure washer is ready for use.

PRE-OPERATION:

Adjusting fan pattern

The angle of spray coming out of the lance may be ad-

justed on some lances by rotating the nozzle. This will

vary the spray pattern from approximately a 0° narrow

high impact stream to a 60° wide fan spray (fig. 16-17).

A narrow stream has high impact force on the clean-

ing surface and results in maximum deep cleaning in

a concentrated area. However, this narrow high impact

spray must be used cautiously, as it may damage some

surfaces.

A wide fan pattern will distribute the impact of the

water over a larger area, resulting in excellent cleaning

action with a reduced risk of surface damage, Large sur-

face areas can be cleaned more quickly using a wide

fan pattern.

Nozzle cleaning instructions

A clogged or partially clogged nozzle can cause a sig-

nificant reduction of water coming out of the nozzle

Bort BHR-2200-Pro 93411997 Мойка высокого давления BORT BHR-2200-Pro онлайн [8/28] 822809

Похожие устройства