Home
Главная
Levenhuk
Монокуляры
Halo 13x 77665
Инструкция к Levenhuk Halo 13x Страница: 5

Levenhuk Halo 13x 77665 Инструкция к Levenhuk Halo 13x онлайн [5/36] 823124

Getting started

Install batteries

• Open the battery compartment cover (10) and insert 5 batteries according to the

correct polarity marks. Close the cover.

Installing/removing the memory card

• The device supports memory cards class 10 up to 32GB.

• Remove the rubber cover (2) from the USB and microSD slots.

• Insert the microSD card into the slot. Make sure the direction is right. Do not force

the card in.

• Format the microSD card before starting, as it will improve its compatibility with

the device.

• To remove the card from the slot, press the edge of the memory card in gently,

and the card will pop out. Then, remove the card.

Note: If the memory card is not installed, a No Card icon will be displayed.

Button panel and device settings

A long press will turn the device on/o and to zoom in/out the image. For the other

functions, use a short press.

POWER button

Press and hold the POWER button for 3 seconds to turn the device on or o.

Turn the focus wheel to adjust the focus.

Notes:

• If the device fails to activate, check for defective or improperly installed batteries.

Always only use the recommended batteries.

• If you wear glasses, keep them on while using the device.

IR UP button

If the light is insucient or when used in the evening, turn on the IR by pressing the IR

UP button. The image will change from color to black and white. You may select the

brightness level from 1 to 7. The brightness values will be displayed on the LCD screen.

Button functions: 1) IR brightness level up; 2) Zoom in; 3) scroll the menu up.

Notes:

• Do not use IR in daylight (when IR is on, you will have a color image, when IR is

o — black and white image).

• If the battery power is not enough, the IR LED level will lower automatically. If

only half power is le, the max. brightness level is 5. If only 25% power is le,

the max. brightness level is 3. If the battery power is lower than 25%, the IR LED

cannot be activated.

IR DOWN button

Button functions: 1) IR brightness level down; 2) Zoom out; 3) scroll the menu down.

MODE button

This button switches between 3 in-built modes: 1) photo mode; 2) video mode; and 3)

playback mode. The default mode is video.

MENU button

To change the settings, press the MENU button and highlight the desired menu item by

scrolling up (IR UP) or down (IR DOWN).

Select the highlighted item by pressing the SHOT button.

In the menu, you can select photo or video resolution, night vision sensitivity, change

the language, set the date, set auto power o, put the date on photos or videos, format

the memory card, view and delete the current le or all les from the memory card, etc.

Note: To get to the submenu of the playback mode, you need to select the playback

mode rst (MODE button).

Please note that the device can produce a color image, a black and white image, a

bright green image, or an image with a color lm eect. However, the color image is not

available when night mode is on. Press and hold the MENU button for three seconds.

SHOT button

Button functions: 1) takes a picture in Photo mode; 2) starts and stops video recording

in Video mode; 3) enters the sub-menu.

Display information

Copying les

You can transfer les from the device to your smartphone, tablet, or PC directly.

1. Insert the memory card into a card reader; or

2. Connect the device to your computer with a USB cable.

Current mode Night vision sensitivity

Memory card Battery status

Indicating IR levels (1–7)

Indicating the Zoom in levels

up to 4x

Levenhuk Halo 13x 77665 Инструкция к Levenhuk Halo 13x онлайн [5/36] 823124

Похожие устройства