Husqvarna 143AE15 9660696-01 Инструкция к Husqvarna 143AE15 9660696-01 онлайн [19/77] 823569

18 – English

MAINTENANCE

Maintenance schedule

The following is a list of the maintenance that must be performed on the machine. Most of the items are described in the

Maintenance section. The user must only carry out the maintenance and service work described in this Operator’s

Manual. More extensive work must be carried out by an authorized service workshop.

Maintenance

Daily

maintenance

Weekly

maintenance

Monthly

maintenance

Clean the outside of the machine. X

Check that the handle and handlebar are undamaged and

secured correctly.

Check that the stop switch works correctly. X

Check that the cutting attachment does not rotate at idle. X

Clean the air ﬁlter. Replace if necessary. X

Check the cutters. Never use cutters that are blunt, cracked or

damaged.

Check that nuts and screws are tight. X

Check that there are no fuel leaks from the engine, tank or fuel

lines.

Check the starter and starter cord. X

Check that the vibration damping elements are not damaged. X

Clean the outside of the spark plug. Remove it and check the

electrode gap. Adjust the gap to 0,6-0,7 mm or replace the spark

plug. Check that the spark plug is ﬁtted with a suppressor.

Clean the machine’s cooling system. X

Clean the outside of the carburettor and the space around it. X

Check the oil level of the gear box, and top up if necessary. X

Clean the mufﬂer. X

Check the fuel ﬁlter from contamination and the fuel hose from

cracks or other defects. Replace if necessary.

Check all cables and connections. X

Check the clutch, clutch springs and the clutch drum for wear.

Replace if necessary by an autorized service workshop.

Replace the spark plug. Check that the spark plug is ﬁtted with a

suppressor.