Timberk c WiFi N72, 100л. T-WSS100-N72-V-WF Инструкция по эксплуатации онлайн [35/68] 825287

IM2022

temperature and heating power in this mode is not available. Press the ECO button

again to exit this mode.

- this indicator lights up when the Eco mode is activated.

- this indicator lights up when the device is connected to the HOME INTELLECT

application.

- this indicator lights up in the process of heating water.

- this indicator lights up when the water in the tank has reached the set

temperature and the appliance enters the keep warm mode.

Water heater operation

1. Turning

1.1. First open one of the hot water outlet taps, after that open the cold water supply

tap. The electric water heater will start filling with water. When water flows freely from

the hot water tap, it means that the water heater is completely filled with water and the

hot water outlet tap can be closed.

NOTE!

During normal operation, the cold water inlet tap must be in the “open” position.

1.2. Put the electric plug into the socket. The power indicator will light up on the RCD

(see item 7). The current water temperature in the internal tank will appear on the

display.

2.Setting the water heating temperature

2.1. The water heating temperature can be set within the range from +35 °C (±5 °C) to

+75 °C (±5 °C)

2.2. Press the UP and DOWN buttons to select the desired heating temperature. One

press of the button regulates the temperature by 1oC

2.3. Press the SET button to select the heating power: 700W, 1300W, 2000W

2.4The water heater thermostat automatically maintains the water temperature. When

the water temperature inside the water heater reaches the set temperature, heating is

automatically turned off, the indicator light on the bottom of the device goes off and

water temperature is maintained due to thermal insulation. Whenever water

temperature drops below the set temperature, heating is automatically turned on and

the indicator light comes on.

2.5. Press the ECO button to select this mode - the corresponding indicator will light up

on the control panel. The appliance will start heating water up to 55oC with a heating

power of 1300W. Changing the temperature and heating power in this mode is not

available. Press the ECO button again to exit this mode.