Home
Главная
Karcher
Для плоских поверхностей
2.644-074
Инструкция к товару Страница: 6

Karcher 2.644-074 Инструкция к товару онлайн [6/88] 825854

6English

Environmental protection

The packing materials can be recycled. Please

dispose of packaging in accordance with the en-

vironmental regulations.

Electrical and electronic devices contain valua-

ble, recyclable materials and often components

such as batteries, rechargeable batteries or oil,

which - if handled or disposed of incorrectly - can

pose a potential danger to human health and the envi-

ronment. However, these components are required for

the correct operation of the device. Devices marked by

this symbol are not allowed to be disposed of together

with the household rubbish.

Working with detergents may only be performed on

watertight surfaces with connection to the waste

water sewage system. Do not allow detergent to enter

waterways or the soil.

Notes on the content materials (REACH)

Current information on content materials can be found

at: www.kaercher.de/REACH

Accessories and spare parts

Only use original accessories and original spare parts.

They ensure that the appliance will run fault-free and

safely.

Information on accessories and spare parts can be

found at www.kaercher.com.

Scope of delivery

Check the contents for completeness when unpacking.

The scope of delivery for your equipment version is

shown on the packaging. Please contact your dealer if

any accessories are missing or in the event of any ship-

ping damage.

Safety instructions

몇 CAUTION

● Do not use the device when persons are in the vicinity

of the cleaning head.

● Switch the high-pressure cleaner off and disconnect

the T-Racer from the high-pressure gun after finishing

cleaning work and before performing any work on the

T-Racer.

● Do not trigger the high-pressure jet at the high-pres-

sure gun until the T-Racer is on the surface to be

cleaned.

● Recoil danger. Keep proper footing and hold the high-

pressure gun and extension tube firmly.

● Maximum water temperature 60°C (please observe

the instructions for your high-pressure cleaner).

Note

● Be sure to always adhere to the safety instructions for

your high-pressure cleaner and the locally applicable

regulations and directives.

Symbols on the device

Device description

For the illustrations, refer to the graphics page

Illustration A

1 Extension tube

2 Rotor arm height adjustment

3 Casing

4 Bayonet connector with union nut

5 Handle

6 Surface cleaning foot button

7 Edge and corner cleaning foot button

8 High-pressure nozzle

9 Rotor arm

10 Front high-pressure nozzle

11 Skids

12 Rinsing nozzle

13 Rinsing function foot button

Extension tube installation

Note

Ensure that the device components are tightly connect-

ed on installation.

Illustration B

1. Plug the bayonet into the mounting.

2. Turn the extension until it latches into place.

3. Tighten the union nut.

Repeat the procedure for all further extension tubes.

Initial startup

Selection of the high-pressure nozzles

Using the appropriate high-pressure nozzles is a pre-

requisite for fault-free operation.

Note

These are to be selected according to the flow rate (l/

min). Information on the flow rate is provided in the op-

erating instructions or on the type plate of the high-pres-

sure cleaner.

Note

The yellow high-pressure nozzles are already fitted.

 DANGER

Risk of injury! Never reach under the

edge of the T-Racer during operation

Cleaning type: Surface cleaner

Cleaning type: Edge and corner cleaning

Cleaning type: Rinsing function

HARD For durable surfaces, e.g. tiles, concrete,

stone

SOFT For sensitive surfaces, e.g. wood

Karcher 2.644-074 Инструкция к товару онлайн [6/88] 825854

Похожие устройства