Home
Главная
Al-Ko
Электрические
Comfort 36.8 E Combi Care 113573
Инструкция к AL-KO Comfort 36.8 E Combi Care 113573 Страница: 39

Al-Ko Comfort 36.8 E Combi Care 113573 Инструкция к AL-KO Comfort 36.8 E Combi Care 113573 онлайн [39/420] 827697

Al-Ko Comfort 36.8 E Combi Care 113573 Инструкция к AL-KO Comfort 36.8 E Combi Care 113573 онлайн [39/420] 827697

442246_a 39

Operation

6.5 Establishing the mains connection (09)

1. Firmly plug the socket (09/1) of the mains ca-

ble into the plug (09/2) on the motor switch.

2. Clamp (09/a) and (09/b) the mains cable

(09/3) in the cable strain relief (09/4) so it

cannot be pulled off the motor switch.

6.6 Starting and stopping the motor (10)

IMPORTANT!

Danger of damage to the

appliance

The motor and blade sys-

tem can be damaged by

consecutively switching on

and off briefly several

times.

■

Only switch the motor

on when the blade sys-

tem has stopped.

Starting the engine

1.

Press the safety button (10/1) and hold (10/a).

2. Pull the motor switch bracket (10/2) towards

the handlebar (10/3) (10/b). Start the motor

and blade system.

3. Release the safety button (10/1) and hold the

motor switch bracket (10/2).

NOTE

The motor switch bracket does not lock

in place. Hold it tight against the handle-

bar during the entire working period.

Stopping the motor

1. Release the motor switch bracket (10/2). It

automatically returns to its initial position.

The motor stops immediately. The blade system

keeps running until it stops.

CAUTION!

Danger of cutting inju-

ries

There is a danger of lacer-

ations when reaching into

the blade system while it is

running on.

■

Wait until the blade sys-

tem has stopped.

6.7 Attaching and removing the grass

collector [optional] (11)

Assembly: See images (03) to (04).

The appliance can be operated with and without

grass collector.

Attach the grass collector

1. Raise the impact flap (11/1) (11/a).

2. Attach the grass collector (11/2) in the hold-

ers (11/b) from behind.

3. Release the impact flap.

Remove and empty the grass collector

1. Stop the appliance and wait until the blade

system has stopped.

2. Raise the impact flap (11/1).

3. Lift the grass collector (11/2) out of the hold-

ers and take off to the rear.

4. Empty the grass collector.

5. Attach the grass collector (see above).

6.8 Moving the appliance on the grass(12)

Guide the appliance (12/1) over the grass (as

shown in the image) in such a way to avoid dam-

aging the mains cable (12/2). Heed the safety in-

structions (see chapter 3.2 "Safety instructions

for scarifiers", page34).

■

Watch out for objects in the grass and re-

move them from the working area.

■

Guide the mains cable by hand.

■

Only control the appliance by the handlebar.

■

Move the appliance at walking speed.

■

Always move the appliance across the slope.

Похожие устройства