Тион IQ 200 White 00-10029184 Руководство по эксплуатации IQ 200 онлайн [5/88] 828023

Safety

Failure to comply with these requirements may result in device

breakage and/or health and safety hazards

Failure to meet these requirements may cause the device

to malfunction

The device should not be used by children or anyone with certain physical, sensory or mental

impairments without supervision.

Before connecting the device to the mains, please check that the mains voltage corresponds to

the supply voltage of the device (see technical specifications).

The device must only be used as intended. Any use of the device for purposes other than those

specified in this User Manual constitutes a violation of the terms of use.

The device must not be used in open-air environments. The presence of moisture or other

foreign materials within the device may cause damage to it.

Do not install the air purifier next to walls. To ensure even air intake, please install the device at

least 20 cm from any walls.

Do not use in premises with sources of steam or other significant humidity where there is a

chance of water getting directly onto the device. Such premises include swimming pools, steam

baths, saunas, restrooms and bathrooms.

Unplug the device from the mains supply after use. Unplug the device with dry hands and

holding it by the plug, not the cable.

Do not use in premises with air temperatures lower than +10 °С or above +45 °С or with a

relative air humidity of more than 80%.

To ensure even air outflow, please do not place any objects on the purifier.

Do not operate the device without a filter installed.

During lightning storms, the device must be turned off and unplugged from the mains.

Please only use extension cords that correspond to the power consumption of the device.

The use of unsuitable extension cords may result in a short circuit or burn the cable.

Do not activate the device if the power supply cord insulation or any part of the housing is

damaged.

Do not carry out any repairs or alterations to the design of the device. If any damage or possi-

ble signs of malfunction are detected, contact the Vendor’s service center for advice on further

operation of the device.