Home
Главная
Bosch
Электрические
AdvancedAquatak 140 0.600.8A7.D00
Инструкция к Bosch AdvancedlAquatak 140 06008A7D00 Страница: 13

Bosch AdvancedAquatak 140 0.600.8A7.D00 Инструкция к Bosch AdvancedlAquatak 140 06008A7D00 онлайн [13/294] 828031

Bosch AdvancedAquatak 140 0.600.8A7.D00 Инструкция к Bosch AdvancedlAquatak 140 06008A7D00 онлайн [13/294] 828031

English | 13

u If the plug is damaged, pay attention

to the following:

u Plugs and sockets situated near the

work site or outdoors should be to

class IP 55 of BS 5490 to provide

adequate protection against ingress

of water, etc. and cable entries re-

quire effective sealing. Rubber

shrouds should be provided over

cable glands. Drip-proof (class IP X2

of BS 5490) plugs and sockets to BS

4343 are suitable for use indoors

where the plug is away from the wa-

ter spray area where the appliance is

in use.

u Never touch the mains plug with wet

hands.

u Do not pull plug while operating the

device.

u Do not run over, crush or pull the

power supply cord or extension

cord, otherwise it may be damaged.

Protect the cable from heat, oil and

sharp edges.

u Do not use the unit, if the power sup-

ply cord or important parts, e.g.

high-pressure hose, power gun or

safety devices are damaged.

u Warning: Inadequate extension

cables can be dangerous.

u If an extension cord is used, the plug

and socket must be of watertight

construction. The extension cord

must have a cross section in accord-

ance with the operating instructions

and be protected against splashed

water. The connection must not be in

water.

u When replacing plugs on the power

supply cable or extension lead the

spray water guard and mechanical

stability must remain intact.

Water connection

u Comply with the regulations of your

water supply company.

u All connecting hoses must have

properly sealed joints.

u Make sure that the supply hose is at

least 12.7mm (1/2") in diameter

and is reinforced.

u The appliance should never be used

on the drinking water supply without

a back flow valve. Water which has

passed the back flow valve is re-

garded as undrinkable.

u The high-pressure hose must not be

damaged (danger of bursting). A

damaged high-pressure hose must

be replaced immediately. Only use

hoses and connections recommen-

ded by the manufacturer.

u High-pressure hoses, fittings and

couplings are important for the

safety of the appliance. Use only

hoses, fittings and couplings recom-

mended by the manufacturer.

u Only clean or filtered water should

be used for intake.

Application

u Before use, check that the machine

and operating equipment are in per-

Bosch Power Tools F 016 L81 693 | (10.01.2019)

Похожие устройства