ATTEN LT-350B, 50 мм, 200 Вт 142252 Руководство пользователя_eng онлайн [2/2] 829873
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

ATTEN LT-350B, 50 мм, 200 Вт 142252 Руководство пользователя_eng онлайн [2/2] 829873

ATTEN LT-350B, 50 мм, 200 Вт 142252 Руководство пользователя_eng онлайн [2/2] 829873
temperature controlled soldering pot
providing
better protection Please read operating.. this manualbefore
Keep this manual for reference.
SAFETY INSTRUCTION
Warnings and cautions are placed at critical points in this
CAUTION may result
in an injury to the user , or damage to the unit.
WARNING
This entire device becomes hot in use .. DO NOT TOUCH the
contents.
wear eye protection. Guard against accidental
spills or splatter.
MOLTEN SOLDER
can cause serious burns.
Be surethe pot has co
oled down when changing the parts.
Please unplug the power cord when not in use.
CAUTION
The molten solder in the solder pot is dangerous since it
reaches about
480℃.
The pot cover also becomes very hot
may cause burns or
1. Use this solder pot on a highly stable metal workbench,
losive
articles.
2. Provide warning
notice of hot pot in the area of use.
3.
Never permit an inexperienced person unfamiliar with
the characteristics of molten
solder to use this device.
which comes with stainless steel
manual to direct the
Failure to comply with a WARNING or
4.
Do not modify the solder pot.
5.
The presence of moisture can cause molten solder to
Keep workplace and work clean
and dry.
6. Don’ t operate with wet hands, it will increase the risk of
electric shock.
8.Don’t always keep temperature at “400~480
℃”
long time, it may lead to
shorten the service life of heating element.
FEATURES
1. Designed with electronic control board and high quality
temperature adjustment function
andsteady performance.
2. Crucible is made by stainless steel
prolonged service life.
3. Comes with iron chromium aluminum wire heater and
preservation material provides
excellent thermal stability .
4. Ceramic heater insul
ated tube provides better protection
temperature operation.
5. Suitable for melting solder, plastic, resin and more.
SPECIFICATIONS
Power Switch
Solder Pot
Regulator Knob
Model No.
Consumption
Temperature
Range
Crucible Size
Crucible material
Stainless steel
Melting Time
Solder capacity
Voltage
CAUTION
· Keep the solder po
t temperature at"300℃~350℃"
prolong its service life.
· Do not scrub or hit the solder pot with sharp or hard
could be scratched which will cause
corrosion and damage.
OPERATION
ld
normal.
Before using, be sure the power source contains a “ground
without that is not allowed.
Use a sand tray or insulation under the pot. Anchor the pot to
the fwork sur ace.
1. Turning on the power , adjust the temperature regulator
high
-temperature position, after one minute,
wall of solder pot until
molted solder liquid reach to 1/4 depth of solder pot.
2. After solder stock is melted, adjust the temperature to
s d temuggeste perature
range of “300~350℃
( ween bet
4~9 scal ).e
①.Temperature too high will cause premature solder
will become black or
yellow. If flux has highly acidic substances,
pot will be corroded.
②.Keep the solder crucible f
ull during use.
Do not
heat; this will damage
the unit.
3. When not in use temporarily , please turn the temperature
position to prevent solder stock oxidizing.
4. Disc necton the pot when not in use.
TROUBLE SHOOTING
if does not work when powered on, please the solder pot
local supplier.
MAINTENANCE AND CLEANING
1. Before cleaning, please make sure the solder pot has
and the power is disconnected.
2. Always use a dry or moist towel to clean the pot, do not
Please do not use any strong or
paint thinner,
turpentine or similar cleaning agents which might contain
chemical substances, it will cause damage to the m
etal
parts of the unit.
3. Please do not block its ventilation holes or hinder its heat
prevent overheating.
metal surfaces or
when the power is on. Improper handling
never use it near paper
heated solde r pots and
explode and splatter.
(between 7~9 scale) for a
components providing
fea ion turing corros
aluminosilicate heat
from high
Power
300W 200W 150W 250W
200~480
℃
(Max.setting)
Approx.
8 mins
220V
~
50Hz
LT-310B
LT-350B LT-360B
LT-380B
200~480
℃
200~480
℃
200~480
℃
φ100x44mm φ50x38mm φ36x38mm φ80x42mm
500g
1200g
250g
800g
Approx.
8 mins
Approx.
8 mins
Approx.
8 mins
(between 4~9 scale) to
objects, the surface
smoke a little, this is
wire”,working
knob to the
take solder stock rub the inner
pot aging,melted
per ptymit an em pot
knob to “LO”
check er cordthe pow
cooled down and
use wet towel.
dissipation t o
Web:www.atten.com
Tel:86-755-8602 1373
Fax:86-755-8602 1365
Facebook:https://www.facebook.com/attencn/
E-mail:sales@atten.com.cn
SOLDER POT USER MANUAL
LT-SERIES
ons.
.
resistance and
7. Use original materials to replace accessories.
9. If power cord was damaged, in order to avoid dangerous, must send
fault material to manufacturer or local service center to replace and
repair it.
solder
thesolder
to f y ull

Похожие устройства

Скачать