WORX Professional WU340S 800Вт, 26мм, 3Дж, кейс WU340S Инструкция онлайн [6/16] 830501

TECHNICAL DATA

WU340S WU340S.1 WU340K WU340F

Rated voltage 220V~50Hz

Rated power input 800W

No load speed 0-1300r/min 1300r/min

Impact rate 0-5000bpm 5000bpm

Impact energy 3.0J

Protection class

/II

Max. drilling

capacity

Masonry

26mm

Steel

13mm 13mm /

Wood

32mm 32mm /

Machine weight

3.1kg 2.9kg 2.9kg

Chuck type

round square

ACCESSORIES

WU340S WU340K

WU340F

WU340S.1

Auxiliary handle 1 1

Depth gauge 1 1

Keyless chuck with adaptor / 1

SDS drill bits (6/8/10mm) / 3

SDS chisel bits / 1

We recommend that you purchase your accessories from the same store that sold you the tool. Refer to the

accessory packaging for further details. Store personnel can assist you and offer advice.

OPERATING INSTRUCTIONS

NOTE: Before using the tool, read the instruction book carefully.

1. INSERTING/REPLACING THE DRILL CHUCK (only for WU340S WU340S.1) (See Fig. A)

• Inserting the Drill Chuck

To work with tools without SDS-plus (e.g., drills with cylindrical shafts), a suitable drill chuck must be used

(not supplied). Insert the adapter (11) of the drill chuck (10) with a twisting motion into the SDS-plus chuck (9)

until it can be heard to lock. The adapter locks itself. Check the locking by pulling on the drill chuck.

• REMOVING

Retract back the bit holder locking sleeve (8) and pull out the chuck (10).

2. INSERTING AND REMOVING DRILL BITS IN THE SDS-plus CHUCK

Take care that the dust protection cap (7) is not damaged when changing tools.

• INSERTING

Clean and lightly grease the bit with the oil provided before inserting. Insert the dust-free bit into the bit

holder with a twisting motion until it latches.

The bit locks itself. Check the locking by pulling on the tool.

• REMOVING

Retract back the bit holder locking sleeve (8) and pull out the bit.

WORX Professional WU340S 800Вт, 26мм, 3Дж, кейс WU340S Инструкция онлайн [6/16] 830501

Похожие устройства