Contracor 10115000 Инструкция по эксплуатации онлайн [7/36] 830772

CONTRACOR

Portable Suction Blast Tool SFG-Type Art. 10115000

5. Set-Up and Operation

5.1 Set-Up

An air lter is recommended in the air supply to remove condensed moisture from the air line.

Connect POWER GUN to a 13мм (1/2"). lD air hose. An isolation valve is required at the air

source to enable depressurization.

Secure all compressed-air supply hose connections with safety lock pins to prevent accidental

disconnection.

5.2 Operation

Use the pointed end of the lance to pierce the bag of abrasive. Insert the lance into the

abrasive. The upper (air-intake) holes must remain open, and outside of the abrasive.

Pressurize the air supply line.

Fill blast media into the portable container. Put on the appropriate protective gear, including

supplied-air respirator, abrasive resistant clothing, leather gloves, and hearing protection as

required. Hold the gun approximately 150-250 mm from the blast surface, and squeeze the

trigger lever. Adjust the stand off distance and angle for optimum performance.