Home
Главная
Hilti
Бензорезы
DSH 900-X 40 2265863
Инструкция к HILTI DSH 900-X 40 2265863 Страница: 43

Hilti DSH 900-X 40 2265863 Инструкция к HILTI DSH 900-X 40 2265863 онлайн [43/492] 830938

*2271384*

2271384 English 35

7 Care and maintenance

WARNING

Risk of injury. Touching the rotating cut-off wheel or hot parts of the machine may lead to injury or burns.

▶ Switch the engine off and allow the product to cool down before all maintenance, repairs, cleaning or

servicing.

7.1 Maintenance table

Before use Every 6

months

If necessary

Check that the tool is complete, in perfect condition

and free of leaks. Have it repaired if necessary.

Check for dirt and foreign matter. Clean if necessary. X

Check that the controls function correctly. Have repairs

carried out if necessary.

Check that the cut-off wheel is in perfect condition.

Replace if necessary.

Check that all externally accessible nuts and screws are

securely tightened.

X X X

Check that the fuel filter is clean. Replace it if neces-

sary.

X X

Replace the air filter if the product does not start or

engine performance fades noticeably.

Clean or replace the spark plug if the product does not

start or is difficult to start.

Adjust the idling speed if the cut-off wheel does not

slow to a standstill when the engine is idling.

Have the product repaired by Hilti Service if the drive

belt slips when a load is applied to the cut-off wheel.

7.2 Cleaning or replacing the air filter 10

ATTENTION

Risk of damage. Entry of dust causes irreparable damage to the product.

▶ Never operate the machine if the air filter is damaged or missing.

▶ When changing the air filter, the product should stand upright and should not be laid on its side. Take

care to ensure that no dust finds its way onto the underlying filter screen.

Change the air filter if engine performance drops noticeably or if the engine becomes difficult to start.

1. Release the securing screw on the air filter cover and remove the cover.

2. Carefully remove the dust adhering to the air filter and the filter chamber (use a vacuum cleaner).

3. Release the four screws retaining the filter holder and remove the air filter.

4. Fit the new filter and secure it with the filter holder.

5. Fit the air filter cover and tighten the retaining screws.

7.3 Replacing a broken starter cord 11

ATTENTION

Risk of damage. The housing may suffer damage if the starter cord is too short.

▶ Never continue to use a broken starter cord. Replace it immediately.

1. Unscrew the three securing screws and remove the starter assembly.

2. Remove the remaining pieces of the starter cord from the spool and the starter handle.

Hilti DSH 900-X 40 2265863 Инструкция к HILTI DSH 900-X 40 2265863 онлайн [43/492] 830938

Похожие устройства