Ryobi RLM53190YV 5133003672 Инструкция к Ryobi RLM53190YV 5133003672 онлайн [13/368] 831079

English

WARNING

Do not store the product with petrol in the tank inside a

building where fumes may reach an open flame or spark.

■ If not using a fuel stabilizer, allow the engine to run until

the product is completely out of petrol.

■ Once the engine has stopped, allow the blade to come

to a complete stop and disconnect the spark plug wire.

■ Turn the fuel valve to the closed position.

■ Turn the product on its side (with carburetor facing up)

and clean grass clippings that have accumulated on the

underside of the mower deck.

■ Clean the underside of the mower deck.

■ Wipe the product clean with a dry cloth.

■ Check all nuts, bolts, knobs, screws, fasteners, etc., for

tightness.

■ Inspect moving parts for damage, breakage, and wear.

Have repairs made on any damaged or missing parts.

■ Store the product in a well-ventilated area that is clean,

dry, and out of the reach of children.

■ Do not store near corrosive materials, such as fertilizer

or rock salt.

To lower the handle before storing:

See figure 18.

■ Remove starter rope from the guide and allow it to

retract into the engine.

■ Remove the grass catcher.

■ Release the upper quick release fasteners of the upper

handle and fold the upper handle down.

■ Release the lower quick-release fastener.

■ Fold the lower handle forward past the edges of the

handle mounting brackets and make sure that the

bracket supports the handle; otherwise, the air filter

may be damaged.

■ Close the lower quick release fasteners and let the

bracket support the handle, making sure not to bend or

kink the control cables.

TRANSPORTATION

■ Stop the product, disconnect the spark plug wire, and

wait until the blade comes to a complete stop. Allow the

product to cool down.

■ Empty the fuel tank by running the engine till it stops.

Empty oil by following the instruction for changing oil.

■ Secure the product against movement or falling to

prevent injury to persons or damage to the product.