Ingersoll rand 529 Инструкция к товару онлайн [3/60] 831579

Ingersoll rand 529 Инструкция к товару онлайн [3/60] 831579
16574873_ed4 EN-1
EN
Product Safety Information
Intended Use:
This Air Reciprocating Saw is designed for cutting plastics, berglass, composites,
aluminum and sheet metal.
For additional information refer to Product Safety Information Manual Form 16578809.
Manuals can be ingersollrandproducts.com.
Product Specications
Model
Strokes Per
Minute
Length
without
Blade
Stroke
Length
Sound Level dB (A)
(ISO15744)
Vibration (m/s
2
)
(ISO28927)
spm in (mm) in (mm) † Pressure (L
P
) ‡ Power (L
W
) Level *K
4429 5,000 9.25 (234) 0.39 (10) 66.2 77.2 9.5 2.4
429 10,000 8.25 (209) 0.39 (10) 84.3 95.3 25.7 4.0
529 9,500 9.67 (245.5) 0.39 (10) 84.0 95.0 3.1 1.03
† K
pA
= 3dB measurement uncertainty
‡ K
wA
= 3dB measurement uncertainty
* K = Vibration measurement uncertainty
WARNING
Sound and vibration values were measured in compliance with internationally recognized
test standards. The exposure to the user in a specic tool application may vary from these
results. Therefore, on site measurements should be used to determine the hazard level in
that specic application.
Installation and Lubrication
Size air supply line to ensure tool’s maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air lter and compressor tank daily. Install a
properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any hose
coupling without internal shut-o, to prevent hose whipping if a hose fails or coupling discon-
nects. See drawing 16585382 and table on page 2. Maintenance frequency is shown in a circular
arrow and dened as h=hours, d=days, and m=months of actual use. Items identied as:
1. Air lter 6. Thread size
2. Regulator 7. Coupling
3. Lubricator 8. Safety Air Fuse
4. Emergency shut-o valve 9. Oil
5. Hose diameter
Скачать