Fubag HRS4500 + 4 зубила 100120 Инструкция к товару онлайн [2/10] 831762

Omperator's anual

www.fubag.ru

- 1 -

WARNING! BEFORE USINGAIR PLEASE READ THIS INSTRUCTION MANUAL

CAREFULLY.

ONLY QUALIFIED AND WELL-TRAINED STAFF ACQUAINTED WITH THE MANUAL

CAN USEAND OPERATE THIS TOOL.

TOOL

The operation manual contains the description, safety rules and all the information necessary for

proper maintenance of FUBAG pneumatic tool. Please keep the operation manual and refer to it in

case of any questions concerning safety operation, maintenance, storage and transportation of

FUBAG tool. Nonobservance of the indicated recommendations may cause the damage of the tool

and injuries of the user.

1. Safety rules

- General safety requirements are to conform to EN 792-9.

- Only the persons who have taken the preliminary training and are aware of the tool

structure, safety rules and the requirements of the operation manual can operate the tool.

- Vibration characteristics of the tool correspond to EN ISO 8662-1 requirements. The use of

the tool is not allowed for the operations when vibration levels exceed the values

established by EN ISO 8662-1.

- Noise characteristics of the tool correspond to EN ISO 11202 requirements. The corrected

level of the noise power does not exceed 99 dBA. The use of the tool is not allowed for the

operations when noise levels exceed the values established by EN ISO 11202.

- When operating the tool it is strongly recommended to use the protective spectacles,

headphones and protective gloves.

- Always keep the steady foot rest in order not to stumble. Always fasten the workpiece with a

fixer or a grip to release two hands for operating with the tool.

- Make sure all the clothes fit closely to the body.

- Make sure there are not any foreign objects in the place of operation; and there are not any

people in the proximity of the operating tool.

- The workplace is to be aired well.

- Make sure the tool is in OFF position before connecting the air hose.

- Always disconnect the tool from the aerial system when it is not used.

- Do not pull the hose when transporting the tool.

Do not direct the pneumatic tool or flow of the compressed air at the people, animals or

your own body. Wear protective spectacles in order to avoid small particles of the dust to

get into your eyes together with the flow of the compressed air.

Do not direct the flow of the compressed air at the compressor.

Do not work without any protective footwear. Do not touch the operating compressor with

wet hands and/or feet.

Do not exceed the recommended operating pressure.

Do not fix, disassemble or carry out any other maintenance operations without

disconnecting the tool from the air channel.

Do not use the spare parts of the other manufacturers. Always use only original spare parts.

Danger: