Home
Главная
Al-Ko
Для чистой воды
DIVE 6500/34 113884
Инструкция к AL-KO DIVE 6500/34 113884 Страница: 17

Al-Ko DIVE 6500/34 113884 Инструкция к AL-KO DIVE 6500/34 113884 онлайн [17/128] 833117

477275_f 17

Maintenance and care

ing the clamping position. Recommended cable

length on the float switch approx. 100 mm.

IMPORTANT! Danger of damage to the

pump! There is a danger during pumping out that

the pump could run dry and cause equipment

damage.

■

Monitor the pump continuously when pump-

ing out to the residual water level and avoid

the pump running dry.

■

Take the pump out of service when the resid-

ual water level is reached by pulling out the

mains plug.

NOTE If the water drops below the residual

water level, the pump will draw air in. In this case,

the pump must be vented when the water level

rises and before using it again.

7.3 Switching the pump off

1. Remove the mains plug from the plug socket.

8 MAINTENANCE AND CARE

DANGER! Danger of electric shock!

There is a risk of electric shock when working on

the pump.

■

Disconnect the mains plug before starting

any fault remedying work.

■

Faults in the electrical system must be recti-

fied by a qualified electrician.

8.1 Cleaning the pump

NOTE After conveying swimming pool wa-

ter containing chlorine or fluids that leave resi-

dues, the pump must be flushed out with clear

water.

1. Clean the inlet screen (01/4) with clear water,

if necessary.

9 HELP IN CASE OF MALFUNCTION

DANGER! Danger of electric shock!

There is a risk of electric shock when working on

the pump.

■

Disconnect the mains plug before starting

any fault remedying work.

■

Faults in the electrical system must be recti-

fied by a qualified electrician.

NOTE In the event of faults that you can-

not rectify, please contact our Customer Service

department.

Malfunction Possible

cause

Remedy

Engine does

not start.

Impeller

blocked.

Remove dirt

from the suction

area. Clean with

a suitable tool

through the

opening on the

bottom of the

motor housing

and turn the im-

peller to clear

the blockage.

Thermal pro-

tection switch

has switched

off.

Wait until the

thermal protec-

tion switch on

the pump

switches on

again. Take

note of the max-

imum tempera-

ture of the con-

veying medium.

Have the pump

inspected.

No mains

power.

Check the fus-

es, have the

power supply

checked by a

qualified electri-

cian.

Float switch

does not trip

when the wa-

ter level rises.

Send the pump

to an AL-KO

service facility.

Dry running

protection ac-

tivated

Check the suc-

tion side.

Drip pro-

gramme acti-

vated

Check the suc-

tion side.

Unplug the

mains cable and

plug in again.

Al-Ko DIVE 6500/34 113884 Инструкция к AL-KO DIVE 6500/34 113884 онлайн [17/128] 833117

Похожие устройства