Home
Главная
Ryobi
Аккумуляторные
MAX POWER RY36CSX35A-160 36В 5133004623
Инструкция к Ryobi RY36CSX35A-0 5133004595 Страница: 9

Ryobi MAX POWER RY36CSX35A-160 36В 5133004623 Инструкция к Ryobi RY36CSX35A-0 5133004595 онлайн [9/328] 835727

English |

Bucking a log

Bucking is cutting a log into lengths. It is important to make

sure that your footing is rm and your weight is evenly

distributed on both feet. When possible, the log should

be raised and supported by the use of limbs, logs, or

chocks. Follow the directions for easy cutting. When the

log is supported along its entire length, it is cut from the

top (overbuck).

When the log is supported on one end, cut 1/3 the diameter

from the underside (underbuck). Make the nished cut by

overbucking to meet the rst cut.

1/3

2/3

When the log is supported on both ends, cut 1/3 the

diameter from the top (overbuck). Make the nished cut by

underbucking the lower 2/3 to meet the rst cut.

2/3

1/3

When bucking on a slope, always stand on the uphill side

of the log. When “cutting through”, to maintain complete

control release the cutting pressure near the end of the

cut without relaxing your grip on the chainsaw handles. Do

not let the chain contact the ground. After completing the

cut, wait for the saw chain to stop before you move the

chainsaw. Always stop the motor before moving from tree

to tree.

Limbing a tree

Limbing is the process of removing the branches from

a fallen tree. When limbing, leave larger lower limbs to

support the log off the ground. Remove the small limbs in

one cut. Branches under tension should be cut from the

bottom up to avoid binding the chainsaw.

Springpoles

A springpole is any log, branch, rooted stump, or sapling

that is bent under tension by other wood so that it springs

back if the wood holding it is cut or removed.

On a fallen tree, a rooted stump has a high potential of

springing back to the upright position during the bucking

cut to separate the log from the stump. Watch out for

springpoles—they are dangerous. Do not attempt to cut

bent branches or stumps that are under tension unless you

are professionally trained and competent to do so.

WARNING

Springpoles are dangerous and could strike the operator,

causing the operator to lose control of the chainsaw.

This could result in severe or fatal injury to the operator.

This should be done by trained users.

TRANSPORTATION AND STORAGE

■ Stop the product, remove the battery pack, and allow

the product to cool down before storing or transporting.

■ Clean all foreign material from the product. Store it in a

cool, dry, and well-ventilated place that is inaccessible

to children. Keep the product away from corrosive

agents such as garden chemicals and de-icing salts.

Do not store the product outdoors.

■ Fit guide bar cover before storing the product, or during

transportation.

■ For transportation, secure the product against

movement or falling to prevent injury to persons or

damage to the product.

Ryobi MAX POWER RY36CSX35A-160 36В 5133004623 Инструкция к Ryobi RY36CSX35A-0 5133004595 онлайн [9/328] 835727

Похожие устройства