Timberk мультициклон T-VCC-225 Инструкция онлайн [15/32] 837071

IM2023

15. Retractable tube

16. Retractable tube length adjuster

17. Hose

18. Hose locks

19. Hose air flow control switch

20. Power cord and plug

21. Grid

22. HEPA filter

23. Filter cover

*The appearance of the device may differ from the images in the manual

6. DELIVERY SET

1. Vacuum cleaner and accessories - 1 pc.

2. Instruction manual - 1 pc.

3. Warranty card - 1 pc.

4. Packing - 1 pc.

7. PREPARATION

 The device is designed for cleaning dust in the room.

 Unpack the device and remove the sticker from the body.

 In order to connect the hose to the vacuum cleaner insert hose base into sucking

inlet and press gently until it clicks. In order to disconnect the hose press two locks

located at hose base sides.

 Pull out the retractable tube until the necessary length is reached. For this purpose

move the retractable tube length adjuster and pull out the tube end.

 Insert the hose into the tube.

 Attach one of the nozzles to the tube:

 The "Floor/cfrpet" combined nozzle is designed for carpet mats and similar floor

coatings, and for flat surfaces;

 The "Furniture/slot" nozzle is designed for cleaning upholstered furniture, curtains

and decorative surfaces and

 such as corners or narrow slots.

8. INSTRUCTION FOR USE

 "Cyclone" system ensures maximum power during cleaning.

 Before starting, unwind the cord to sufficient length and insert the plug into the

power supply. The yellow mark on the cord shows optimal cord length. Do not

unwind the cord beyond the red mark.

 Press On/Off button to switch the unit on and press again to stop it.

 You can adjust the air flow using the air flow regulator on the flexible hose handle:

 Decrease flow for cleaning curtains, books, furniture, etc. Increase flow for

cleaning bare floor.