Home
Главная
Husqvarna
Бензиновые
9658775-01
Инструкция к Husqvarna 350 BT 9658775-01 Страница: 13

Husqvarna 9658775-01 Инструкция к Husqvarna 350 BT 9658775-01 онлайн [13/511] 837914

ASSEMBLY

English – 13

Assembling the blow pipe and

control handle

• Connect the blower and control pipe with the ﬂexible

hose. Clamp both ends of the ﬂexible hose in place.

Use the accompanying hardware.

1 Flexible hose

2 Control pipe

3 Clamp

4 Clamp

NOTE!

Lubricate the pipes a little to facilitate assembly.

• Fasten the handle holder to the control pipe and

tighten the knob on the holder

. Please make sure to

align the handle holder with the convex of the control

pipe.

• Adjust the position and angle to achieve a comfortable

working position, and tighten.

350BT

• Use the clamp to fasten the cabling to the ﬂexible

hose.

• Connect the straight pipe and pipe end. Push the

pipes together and turn them so they lock.

530BT

• Fasten the cabling at the centre of the hose using the

strap provided with the cabling.

• First, wrap the ﬂexible hose with the strap. Start at the

bottom. Then run the strap through the hole in the

strap as shown in the ﬁgure. Please note that there is

a possibility of damaging the hose if the strap is

tightened too hard.

Blow pipe

Assemble the intermediate pipe and the blow pipe. It is

possible to add more intermediate pipes if longer blow

pipes are required.

Optional equipment

(Not included in the box).

Handlebar

Disassemble the intermediate pipe. Disassemble the

knob from the holder and puch the holder on to the holder

pipe. Assemble the knob and tighten.

Assemble the intermediate pipe.

Flat nozzle

• If higher air speed is required, the round blow pipe is

replaced by the ﬂat nozzle.

Husqvarna 9658775-01 Инструкция к Husqvarna 350 BT 9658775-01 онлайн [13/511] 837914

Похожие устройства