CALPEDA A 80-170A/A 400/690/50 Hz 100398057 Инструкция по эксплуатации A онлайн [8/64] 840823
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

CALPEDA A 80-170A/A 400/690/50 Hz 100398057 Инструкция по эксплуатации A онлайн [8/64] 840823

CALPEDA AM 50-125AE 230/50 Hz 100501753 Инструкция по эксплуатации A онлайн [8/64] 840824
EN
Page 8 / 64 A,AS Rev16 - Operating Instructions
THIS INSTRUCTION MANUAL IS THE PROPERTY
OF CALPEDA S.P.A. ANY REPRODUCTION, EVEN IF
PARTIAL, IS FORBIDDEN
1. GENERAL INFORMATION
Before using the product carefully read the information
contained in this instruction manual, the manual should
be kept for future reference.
Italian is the original language of this instruction manual,
this language is the reference language in case of
discrepancies in the translations.
This manual is part of the essential safety requirement
and must be retained until the product is nally de-
commissioned.
The customer, in case of loss, can request a copy of
the manual by contacting Calpeda S.p.A. or their agent,
specifying the type of product data shown on the label
of the machine (see 2.3 Marking)
Any changes, alterations or modications made to the
product or part of it, not authorized by the manufacturer,
will revoke the “CE declaration” and warranty.
This appliance should not be operated
by children younger than 8 years,
people with reduced physical, sensory
or mental capacities, or inexperienced
people who are not familiar with the
product, unless they are given close
supervision or instructions on how to
use it safely and are made aware by
a responsible person of the dangers
its use might entail. Children must not
play with the appliance.
It is the user's responsibility to clean
and maintain the appliance. Children
should never clean or maintain it
unless they are given supervision.
Do not use in ponds, tanks or
swimming pools or where people may
enter or come into contact with the
water.
Read carefully the installation section
which sets forth:
- The maximum permissible structural
working pressure (chapter 3.1).
- The type and section of the power
cable (chapter 6.5).
- The type of electrical protection to be
installed (chapter 6.5).
1.1. Symbols
To improve the understanding of the manual, below are
indicated the symbols used with the related meaning.
Information and warnings that must be observed,
otherwise there is a risk that the machine could
damage or compromise personnel safety.
The failure to observe electrical information
and warnings, could damage the machine or
compromise personnel safety.
i
Notes and warnings for the correct management
of the machine and its parts.
Operations that could be performed by the nal
user. After carefully reading of the instructions,
is responsible for maintenance under normal
conditions. They are authorized to affect
standard maintenance operations.
Operations that must be performed by a qualied
electrician. Specialized technician authorised
to affect all electrical operations including
maintenance. They are able to operate with in
the presence of high voltages.
Operations that must be done performed by a
qualied technician. Specialized technician able
to install the device, under normal conditions,
working during “maintenance”, and allowed
to do electrical and mechanical interventions
for maintenance. They must be capable of
executing simple electrical and mechanical
operations related to the maintenance of the
device.
Indicates that it is mandatory to use individual
protection devices.
OFF
Operations that must be done with the device
switched off and disconnected from the power
supply.
ON
Operations that must be done with the device
switched on.
1.2. Manufacturer name and address
Manufacturer name: Calpeda S.p.A.
Address: Via Roggia di Mezzo, 39
36050 Montorso Vicentino - Vicenza / Italia
www.calpeda.it
SUMMARY
1. GENERAL INFORMATION ...............................8
2.
TECHNICAL DESCRIPTION ............................9
3.
TECHNICAL FEATURES..................................9
4.
SAFETY ............................................................9
5.
TRANSPORTATION AND HANDLING ...........10
6.
INST
ALLATION
...............................................10
7.
STARTUP AND OPERATION ......................... 11
8.
MAINTENANCE ..............................................12
9.
DISPOSAL ......................................................12
10.
SPARE P
ARTS
...............................................12
11.
TROUBLESHOOTING ....................................13
Installation examples
......................................61
Drawing for dismantling and assembly
....................62
Declaration of conformity
.........................................64
A,AS Rev16.indd 8 13/02/20 10:10

Похожие устройства

Скачать