P.I.T. 120x100мм, 1400Вт, 700-4200об/мин PWP120-C Инструкция к товару онлайн [3/19] 841174

Burnishing Polisher

English

Safety Notes

General Power Tool Safety Warnings

WARNING

Read all safety warnings

and all instructions.

Failure to follow the warnings and instructions

may result in electric shock, ﬁ re and/or seri-

ous injury.

Save all warnings and instructions for fu-

ture reference.

The term “power tool” in the warnings refers

to your mainsoperated (corded) power tool or

battery-operated (cordless) power tool.

Work area safety

►

Keep work area clean and well lit.

Clut-

tered or dark areas invile accidents.

►

Do not operate power tools in explosive

atmospheres.

such as in the presence of

flammable liquids, gases or dust. Power

tools create sparks which may ignile the

dust or fumes.

►

Keep children and bystanders a way

while operating a power tool.

Distrac-

tions can cause you to lose control.

Electrical safety

►

Power tool plugs must match the outlet.

Never modify the plug in any way. Do

not use any adapter plugs with earthed

(grounded) power tools.

Unmodified

plugs and matching outlets will reduce risk

of electric shock.

►

Avoid body contact with earthed or

grounded surfaces, such as pipes, radi-

ators, ranges and refrigerators.

There is

an increased risk of electric shock if your

body is earthed or grounded.

►

Do not expose power tools to rain or

wet conditions.

Water entering a power

tool will increase the risk of electric shock.

►

Do not abuse the cord. Never use the

cord for carrying, pulling or unplugging

the power tool. Keep cord away from

heat, oil, sharp edges and moving parts.

Damaged or entangled cords increase the

risk of electric shock.

►

When operating a power tool outdoors,

use an extension cord suitable for out-

door use.

Use of a cord suitable for out-

door use reduces the risk of electric shock.

►

If operating a power tool in a damp

location is unavoidable, use a residual

current device (RCD) protected supply.

Use of an rcd reduces the risk of electric

shock.NOTE The term “residual curert de-

vice (RCD)” may be redlaced by the term

“ground faull circuit interrupter(GFCI)” or

“earlh leakage circuit breaker (ELCB)”.

Personal safety

►

Stay alert, watch what you are doing

and use common sense when operating

a power tool. Do not use a power tool

while you are tired or under the influ-

ence of drugs, alcohol or medication.

A moment of inattention while operating

power tools may result in serious personal

injury.

►

Use safety equipment. Always wear

eye protection.

Safety equipment such

as dust mask, non-skid safety shoes, hard

hat, or hearing protection used for appro-

priate conditions will reduce personal inju-

ries

►

Prevent unintentional starting. Ensure

the switch is in the oﬀ -position before

connecting to power source and/or

battery pack, picking up or carrying the

tool.

Carrying power tools with your ﬁ nger

on the switch or energising power tools

that have the switch on invites accidents.

►

Remove any adjusting key or wrench

before turning the power tool on.

wrench or a key left attached to a rotating

part of the power tool may result in person-

al injury.

►

Do not overreach. Keep proper footing

and balance at all times.

This enables

better control of the power tool in unex-

pected situations.

►

Dress properly. Do not wear loose

clothing or jewellery. Keep your hair,

clothing and gloves away from moving

parts.

Loose clothes, jewellery or long hair

can be caught in moving parts.

►

If devices are provided for the connec-

tion of dust ex- traction and collection

facilities, ensure these are connected

and properly used.

Use of dust collection

can reduce dust-related hazards.

Power tool use and care

►

Do not force the power tool. Use the

correct power tool for your application.

The correct power tool will do the job bet-

ter and safer at the rate for which it was

designed.

►

Do not use the power tool if the switch

does not turn it on and off.

Any power

tool that cannot be controlled with the

switch is dangerous and must be repaired.

►

Disconnect the plug from the power

source and/or the battery pack from the

power tool before making any adjust-

ments ,changing accessories, or stor-

P.I.T. 120x100мм, 1400Вт, 700-4200об/мин PWP120-C Инструкция к товару онлайн [3/19] 841174

Похожие устройства