Metabo SE 17-200 RT SET 602259500 Инструкция к товару онлайн [11/108] 841179

ENGLISH en

Original operating instructions

We, being solely responsible, hereby declare that

these burnishing machines, identified by type and

serial number *1), meet all relevant requirements of

directives *2) and standards *3). Technical

documents for *4) - see page 3.

The burnishing machine is suited for

• burnishing, deadening, structuring and brushing,

• polishing and smoothing,

• sanding and deburring the following materials:

• metal, wood and plastics.

It is for dry processing only.

The user bears sole responsibility for any damage

caused by inappropriate use.

Generally accepted accident prevention

regulations and the enclosed safety information

must be observed.

Pay attention to all parts of the text that

are marked with this symbol for your own

protection and for the protection of your

power tool!

WARNING – Reading the operating

instructions will reduce the risk of injury.

WARNING Read all safety warnings and

instructions. Failure to follow all safety

warnings and instructions may result in an electric

shock, fire and/or serious injury.

Keep all safety instructions and information for

future reference.

Pass on your power tool only together with these

documents.

4.1 General Safety Recommendations

for grinding, sanding, wire brushing,

polishing and cutting-off operations:

a) This power tool is intended to function as a

sander, wire brush or polisher. Read all safety

warnings, instructions, illustrations and

specifications provided with this power tool.

Failure to follow all instructions listed below may

result in electric shock, fire and/or serious injury.

b) Operations such as grinding or cutting-off

are not recommended to be performed with

this power tool. Operations for which the power

tool was not designed may create a hazard and

cause personal injury.

c) Do not use accessories which are not

specifically designed and recommended by the

tool manufacturer. Just because the accessory

can be attached to your power tool, it does not

assure safe operation.

d) The rated speed of the accessory must be at

least equal to the maximum speed marked on

the power tool. Accessories running faster than

their rated speed can break and fly apart.

e) The outside diameter and the thickness of

your accessory must be within the capacity

rating of your power tool. Incorrectly sized

accessories cannot be adequately guarded or

controlled.

f) Threaded mounting of accessories must

match the sanding spindle thread. For

accessories mounted by flanges, the arbour

hole of the accessory must fit the locating

diameter of the flange. Accessories that do not

match the mounting hardware of the power tool will

run out of balance, vibrate excessively and may

cause loss of control.

g) Do not use a damaged accessory. Before

each use inspect the accessory such as

abrasive wheels for chips and cracks, backing

pad for cracks, tear or excess wear, wire brush

for loose or cracked wires. If a power tool or

accessory is dropped, inspect for damage or

install an undamaged accessory. After

inspecting and installing an accessory,

position yourself and bystanders away from

the plane of the rotating accessory and run the

power tool at maximum no-load speed for one

minute. Damaged accessories will normally break

apart during this test time.

h) Wear personal protective equipment.

Depending on application, use face shield,

safety goggles or safety glasses. As

appropriate, wear dust mask, hearing

protectors, gloves and workshop apron

capable of stopping small abrasive or

workpiece fragments. The eye protection must be

capable of stopping flying debris generated by

various operations. The dust mask or respirator

must be capable of filtrating particles generated by

your operation. Prolonged exposure to high

intensity noise may cause hearing loss.

i) Keep bystanders a safe distance away from

work area. Anyone entering the work area must

wear personal protective equipment. Fragments

of workpiece or of a broken accessory may fly away

and cause injury beyond immediate area of

operation.

j) Hold the power tool by the insulated gripping

surfaces only when performing an operation

where the accessory may contact hidden

wiring or its own cord (for SE 17-200 RT).

Cutting accessory contacting a "live" wire may

make exposed metal parts of the power tool "live"

and shock the operator.

k) Position the cord clear of the spinning

accessory. If you lose control, the cord may be cut

or snagged and your hand or arm may be pulled into

the spinning accessory.

1. Declaration of Conformity

2. Specified Conditions of Use

3. General Safety Information

4. Special Safety Instructions

Metabo SE 17-200 RT SET 602259500 Инструкция к товару онлайн [11/108] 841179

Похожие устройства