Contracor 10130830 Инструкция на шлем ASPECT онлайн [7/40] 842184

CONTRACOR

ASPECT Art. 10130830

1.3. During use.

Adjust the air volume according to requirements. The integrated air ow indicator

warns the user if insufcient air is being supplied. The airow indicator has been installed

in such a way that the yellow pennant will not be visible when the amount of air is sufcient

and it will only function when it is positioned vertically (g. 2). For safety reasons, the

regulator cannot be closed entirely. Depart the working area immediately if there is an

interruption in the air supply.

Ensure that the compressed air supply hose cannot be trapped, causing interference

with the air supply or preventing a rapid departure from the work area.

The abrasive blasting helmet will not decrease environmental sounds. Therefore

supplementary hearing protection must be used.

Fig. 2. Working

position

Air Flow Indicator

1.4. After use.

After leaving the working area, unbuckle the belt, take off the helmet and disconnect

the air supply hose. Using a brush or a cloth, remove loose residue and dirt from the

components. Clean and inspect the components according to the instructions given in

paragraph 2 and 3. When connecting and disconnecting, take care that no pollution enters

the open hose connections.