Philips AUT3234/10 Руководство по эсплуатации онлайн [3/84] 843181

I. Product Introduction

Congratulations on your purchase and welcome to Philips! Our under-the-sink

water filtration system AUT3234 comes with a 4-stage ultrafiltration, which

eectively reduces particles, heavy metals, volatile organic compounds, pesticides,

bacteria, and pollutants down to 0.01 micron*, while retaining beneficial minerals

at the same time.

Read this user manual carefully before you use the appliance. Save it for future

reference.

* The substances removed or reduced by this system are not necessarily in all

user’s water.

** When the inlet water pressure exceeds 0.4 MPa, a pressure relief valve should

be installed before the system. When the inlet water pressure is below 0.1 MPa,

a pressure booster should be installed before the system. The pressure relief valve

and extra pressure booster need to be purchased separately.

Product name Philips under-the-sink water filtration system

AUT3234

2 liters/minute

CBPA filter: 4000 liters

UF filter: 8000 liters

CB filter: 4000 liters

Product model

Water flow rate

Filtration capacity

Inlet water pressure 0.1-0.4 MPa**

Inlet water temperature

5℃-38℃

Applicable water source

Municipal tap water, which meets all European

Directive on Water for Human Consumption 98/83

requirements and its national transpositions in

the various EU member states.

II. Product Specification

Rated voltage

4.5V