HansGrohe Talis S 200 мм 72813000 00000044203 Инструкция к Hansgrohe Talis S 72813000 00000044203 онлайн [4/36] 843844
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

HansGrohe Talis S 200 мм 72813000 00000044203 Инструкция к Hansgrohe Talis S 72813000 00000044203 онлайн [4/36] 843844

HansGrohe Talis S 200 мм 72813000 00000044203 Инструкция к Hansgrohe Talis S 72813000 00000044203 онлайн [4/36] 843844
4
Safety Notes
Gloves should be worn during installation to prevent crushing and cutting
injuries.
The hot and cold supplies must be of equal pressures.
Installation Instructions
• Prior to installation, inspect the product for transport damages. After it has been
installed, no transport or surface damage will be honoured.
• The pipes and the fixture must be installed, flushed and tested as per the applica-
ble standards.
• The plumbing codes applicable in the respective countries must be observed.
Technical Data
Operating pressure: max. 1 MPa
Recommended operating pressure: 0,1 – 0,5 MPa
Test pressure: 1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature: max. 70°C
Recommended hot water temp.: 65°C
Thermal disinfection: max. 70°C / 4 min
The product is exclusively designed for drinking water!
English
Flow diagram (see page 35)
Normal spray
Regular
Dimensions (see page 35)
Do not use silicone containing acetic acid!
Symbol description
Maintenance (see page 33)
The check valves must be checked regularly according to DIN EN
1717 in accordance with national or regional regulations (at least once
a year).
Adjustment (see page 33)
To adjust the hot water limiter. Using a hot water limiter in combination
with a continuous flow water heater is not recommended.
Fault Cause Remedy
Mixer stiff - Cartridge defective, calcified - Exchange cartridge
Mixer dripping - Cartridge defective - Exchange cartridge
Water escaping at the threaded base - connection hoses not completely screwed into basic
body
- Tighten connection hoses by hand
- O-ring at the connection hose defective. - Exchange O-ring
Hot water temperature too low - Hot water limiter incorrectly set - Set hot water limiter
Spare parts (see page 36)
XXX = Colors
000 = chrome plated
800 = stainless steel optic
Assembly see page 31
Operation (see page 33)
• Hansgrohe recommends not to use as drinking water the first half
liter of water drawn in the morning or after a prolonged period of
non-use.
• Do not rotate the spout further than 360º or damage to the hose will
result.
Cleaning (see page 34)
Special accessories (order as an extra)
service tool #95910000 (see page 36)
Test certificate (see page 36)

Похожие устройства

Скачать