Bosch инверторного типа CLL5000 W 34 E/CLL5000 34 E BOSCH CCL5000 инструкция по эксплуатации онлайн [8/24] 844605
![Bosch инверторного типа CLL5000 W 34 E/CLL5000 34 E BOSCH CCL5000 инструкция по эксплуатации онлайн [8/24] 844605](/views2/2080195/page8/bg8.png)
Troubleshooting
Climate Line 5000 – 6721831691 (2021/02)
8
4Troubleshooting
4.1 Faults with indication (Self diagnosis function)
If a fault occurs during operation, the LEDs flash for an extended period
or an error code is displayed (e.g. EH 02).
If a fault is present for more than 10 minutes:
▶ Briefly disconnect the power supply and switch the indoor
unit back on.
If a fault persists:
▶ Call customer service and provide the fault code and details
of the appliance.
4.2 Faults without indication
If faults occur during operation that cannot be eliminated:
▶ Call customer service about the fault, providing details of the unit.
Table 10
5 Maintenance
CAUTION
Danger due to electric shock or moving parts
▶ Disconnect the power supply before carrying out any maintenance
work.
▶ Have any maintenance steps that are not listed here carried out by an
approved contractor.
5.1 Replacing the batteries
You require 2 size AAA batteries. Using rechargeable batteries is not
recommended.
▶ Remove the battery cover ( Fig. 2).
▶ Insert new batteries, ensuring correct polarity.
▶ Reinstall the cover.
Fault Possible Cause
The output of the indoor unit is too low. Temperature is set too high or too low.
Air filter is soiled and must be cleaned.
Unfavourable ambient conditions for the indoor unit, e.g. the ventilation openings of the units are
obstructed, doors/windows in the room are open or the room contains powerful heat sources.
Low-noise operation is activated and prevents the full output from being used.
Indoor unit does not switch on. The indoor unit has a safety mechanism to prevent overloading. It may take 3 minutes until the
indoor unit can be restarted.
The batteries of the remote control are empty.
The timer is switched on.
Operating mode changes from Cooling or Heating
to Fan Mode.
The indoor unit changes operating mode to prevent the formation of frost.
The set temperature is reached provisionally.
A white mist is coming from the indoor unit. In humid regions, white mist may appear if there is a significant temperature difference between the
indoor air and air-conditioned air.
White mist is emerging from the indoor unit and
outdoor unit.
If heating mode is activated directly after automatic defrosting, this can generate white mist due to
the higher level of humidity.
There is noise coming from the indoor unit and
outdoor unit.
A swooshing noise may be heard inside the indoor unit if the position of the airflow grille is set back.
A quiet hissing noise is normal during operation. This is caused by the flow of refrigerant.
Creaks and squeaks may be heard, as the metal and plastic parts of the unit expand or contract
during heating/cooling.
The outdoor unit also emits a range of other noises during operation which is normal.
Dust is being discharged from the indoor unit or
outdoor unit.
Dust may accumulate in the units if they are shut down for an extended period and not covered.
Unpleasant odour during operation. Unpleasant odours in the air may enter the units and spread.
There may be mould on the air filter and it must therefore be cleaned.
The fan of the outdoor unit is not running
continuously.
Variable fan control is used to ensure optimum operation.
Operation is irregular or unpredictable or the
indoor unit is not responding.
The indoor unit may be affected by interference from mobile radio masts or external signal amplifiers.
▶Briefly disconnect the indoor unit from the power supply then restart it.
Air flow panel or louver is not moving correctly. Air flow panel or louver has been adjusted manually or has not been correctly installed.
▶ Switch off the indoor unit and check whether the components are engaged correctly.
▶ Power on the indoor unit.
Похожие устройства
- Bosch инверторного типа CLL5000 W 34 E/CLL5000 34 E Брошюра BOSCH CCL5000
- Centek 10500/11200W компрессор LANDA, EER-3.19, скрытый LED, R410A CT-67X36 Инструкция к товару
- Centek 14300/16400W компрессор Panasonic, EER-3.19, скрытый LED, R410A CT-67X48 Инструкция к товару
- Centek 17600/18300W компрессор Panasonic, EER-3.19, скрытый LED, R410A CT-67X60 Инструкция к товару
- Centek 2300/2400W, R410А, 4D обдув, LED дисплей, EER-3.21, антибактериальный фильтр GMCC CT-65J07 Инструкция по эксплуатации
- Centek скрытый LED дисплей, компрессор GMCC CT-65C07+ Инструкция к Centek CT-65C07+
- Centek 2800/2900W скрытый LED дисплей, EER-3.26, компрессор GMCC CT-65C09 Инструкция к Centek CT-65C07+
- Centek площадь до 35 кв.м, уровень шума 26Дб, 3550/3650W скрытый LED дисплей, EER-3.21, компрессор GMCC CT-65C12 Инструкция к Centek CT-65C07+
- Centek 5600/5700W Черный/зеркало,скрытый LED дисплей 28дБ,компрессор HIGHLY CT-65H18 Инструкция по эксплуатации
- Centek 5600/5700W серый/карбон, скрытый LED дисплей, 28дБ , HIGHLY, R410A CT-65G18 Инструкция по эксплуатации
- Centek 2100/2200W, EER-3.21, компрессор GREE Landa CT-65A07 Инструкция к Centek CT-65A07
- Centek 2650/2700W скрытый LED дисплей, EER-3.21, компрессор GMCC CT-65A07+ Инструкция к Centek CT-65A07+
- Centek 2650/2700W, EER-3.21, компрессор GMCC CT-65A09 Инструкция к Centek CT-65A07
- Centek 5300/5450W, EER-3.21, компрессор HIGHLY CT-65A18 Инструкция к Centek CT-65A07
- Centek 2100/2200W, EER-3.21, компрессор GREE /Landa/ CT-65B07 Инструкция к Centek CT-65B07
- Centek 2650/2700W скрытый LED дисплей, EER-3.21, компрессор GMCC CT-65B07+ Инструкция к Centek CT-65B07+
- Centek площадь 25 кв.м, уровень шума 23Дб, 2800/2900W скрытый LED дисплей, EER-3.26, компрессор GMCC CT-65B09 Инструкция к Centek CT-65B07
- Centek площадь 70 кв.м, уровень шума 31Дб, 7000/7100W скрытый LED дисплей, EER-3.01, компрессор HIGHLY CT-65B24 Инструкция к Centek CT-65B07
- Centek компрессор HIGHLY CT-65B30 Инструкция к Centek CT-65B07
- Centek 2650/2700W скрытый LED дисплей, EER-3.21, компрессор GMCC CT-65D07+ Инструкция к Centek CT-65D07+