Centek инвертор 2200/2300W 18дБ, EER-3.21 HITACHI/HIGHLY, R410A CT-65K07 WIFI Инструкция по эксплуатации онлайн [28/40] 844644

Centek инвертор 2200/2300W 18дБ, EER-3.21 HITACHI/HIGHLY, R410A CT-65K07 WIFI Инструкция по эксплуатации онлайн [28/40] 844644
27
Prolonged exposure to a cold air stream will adversely affect your
physical condition and cause health problem.
Air the room after using the appliance.
Close doors and windows while operating the appliance, otherwise
the cooling and heating efficiency will be decreased.
Do not install this appliance in facilities with high humidity and in
places where aggressive vapors are discharged!
In case of damage to the power cable or any other part of the
appliance immediately disconnect it from the power supply
system and apply to the Manufacturer’s service centre. In case of
unskilled intervention into the appliance or non-observance of the
operational requirements specified in the present manual will void
the warranty undertakings.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should be supervised
to ensure that they do not play with the appliance.
Special conditions for transportation, the implementation of
split systems: it is necessary to transport outdoor units of air
conditioners ONLY in a vertical position, indoor units can be placed
during transportation both horizontally and vertically. Incorrect
transportation can threaten the device with a break in the tubes,
as well as overflow of compressor oil along the freon circuit. All
these factors provoke incorrect operation of the equipment and
its premature failure. If the external block of the split-system was
nevertheless transported in a horizontal position (but by no means
upside down!), It must be placed vertically for several hours before
installation, without removing it from the original packaging.
ATTENTION!
This air conditioning system can only be used for domestic
purposes!
Immediately disconnect the appliance from power supply in case
of any abnormality in its operation (smell of burning, foreign noise,
etc.).
Risk of Electric Shock! Never attempt to repair the appliance
yourself as this may cause injury by electric current.
2. SCOPE OF SUPPLY
Split type air conditioner:
outdoor unit – 1 pc.
indoor unit – 1 pc.
Indoor unit mounting panel – 1 pc.
Remote control unit (RC) – 1 pc.
Installation supplies (PVC tape, gooseneck, corrugated drain tube,
decorative plastic ring, 4 ring nuts, sealing compound) – 1 set
User Manual – 1 pc.
Supplied separately:
RC unit battery – 2 pcs.
Silver-ion antibacterial filter - 1 pc.
Biofilter - 1 pc.
Component filter - 1 pc.
Charcoal (carbon) filter - 1 pc.
3. APPLIANCE DECRIPTION
AIR CONDITIONER DESIGN
Indoor unit
1. Air outlet
2. Air inlet
3. Front panel
4. Air filter
5. Manual start button
6. Louvers
7. Signal receiver
8. RC unit
9. Drain tube
10. Refrigerant / Fluid tube
Outdoor unit
11. Cutoff valve
12. Air outlet grille
3
8
7
10
9
12
11
4
5
1
2
1
2
6
4. CONTROLLING THE APPLIANCE
MANUAL START FUNCTION
If the RC unit has been lost or its batteries are depleted, you can use
the manual start function.
To do this, carefully lift the front panel of the indoor unit and short-
press the manual start button (5). The air conditioner will start
operating in the AUTO mode. Press the button again to turn the
appliance off.
RC UNIT BUTTON FUNCTIONS
Detailed information on using the remote control can
be downloaded by scanning the QR-code.
BATTERY INSTALLATION AND REPLACEMENT
The RC unit is powered by two AAA size batteries.
Slide off the battery compartment cover and insert the batteries
observing the «+» and «-» polarity symbol shown on the compartment
wall.

Содержание

Похожие устройства

Скачать