Brayer 1902BR 250 Вт 5 поддонов размер 32x32 см регулировка температуры таймер 48 ч BR1902 Инструкция по эксплуатации онлайн [6/52] 846431

• Make sure that specied specications of power

supply voltage of the unit correspond to the

specications of your mains. When the unit is used in

the mains with 60 Hz frequency, it does not need any

additional settings.

• Wash the lid (1) and grids (2) for dehydration with

warm water and neutral detergent, rinse and dry.

• Clean the food dehydrator body (3) with a damp

tissue and wipe it dry.

Attention! Do not submerge the body of the food

dehydrator (3) into water or other liquids. Ensure that no

water spills into the ventilation openings on the body (3)

of the food dehydrator.

• Before the rst use switch the dehydrator on with

no grids (2) and no lid (1) installed to deodorize the

heating element.

• Insert the power cord plug into the mains socket.

• Switch the dehydrator on by pressing the on/o󰀨

button (4) «

», the display (6) will show the drying

temperature and time (see below for the food

dehydration temperature and time settings).

• After 5-10 minutes, switch the dehydrator o󰀨 by

pressing the on/o󰀨 button (4) «

», unplug the power

cord from the electrical outlet

Notes: small amounts of smoke and foreign odor are

to be expected during rst use. This is normal and does

not constitute a warrantable failure.

USING DEHYDRATOR

ATTENTION!

• The dehydration time for each food is individual and

dependent on its size, natural moisture content,

and also on the relative room humidity. For more

information see the «Drying Times & Temperature

Guide» section, see also the dehydration

temperature and time tables.

• Before dehydrating your foods, wash them, dry, and

chop or cut into thin slices.

• Lay out the foods onto grids (2) for dehydration at

a distance so as to ensure free passage of hot air

between the food chops or slices.

• Install the grids (2) on the shaft (pic. 1). Install at

least 3 grids (2) even if some of them are empty.

• Cover the grids (2) with the lid (1).

• Connect the power plug to an electrical outlet.

• Switch the dehydrator on by pressing the on/

o󰀨 button (4) «

», the display (6) will show the

temperature «70ºС» and the drying time «12:00»

hours.

• To set the food dehydration temperature, press the

temperature/operation time setting button (7) «SET»,

press the buttons (5) «+ or -» to set the dehydration

temperature. Possible temperature setting range is

from 35°C to 70°C.

• To set the food dehydration time, press the

temperature/operation time setting button (7)

instr BR1902.indd 6instr BR1902.indd 6 27.02.2023 11:55:4627.02.2023 11:55:46

Brayer 1902BR 250 Вт 5 поддонов размер 32x32 см регулировка температуры таймер 48 ч BR1902 Инструкция по эксплуатации онлайн [6/52] 846431

Похожие устройства