HAKLIFT грузоподъемность 35,0т SAK350SBP Инструкция к товару онлайн [3/12] 848813

Haklift Oy

Asessorinkatu 3-7

20780 Kaarina, Finland

Tel. +358 2 511 5511

sales@haklift.com

www.haklift.com

Lifting Solutions Group

Axel Johnson International

Incorrect seating of the pin may be due to a bent pin, too tight fitting thread or misalignment of the

pin holes. Do not use the shackle under these circumstances. Never replace a shackle pin except

with one of the same size, type and make as it may not be suitable for the loads imposed.

Make sure that the shackle is supporting the load correctly, i.e. along the axis of the shackle body

centerline, avoid introduction of bending loads, unstable loads and do not apply overloads.

Side loads should be avoided as well, as the products are not designed for this purpose. If side loads

cannot be avoided, the following reduction factors must be taken into account:

Load angle

Reduction for side loading, New Working

Load Limit

0 °

100% of original Working Load Limit

45 °

70% of original Working Load Limit

90 °

50% of original Working Load Limit