Levenhuk Blitz 70s BASE 77100 Инструкция к Levenhuk Blitz 114 BASE онлайн [12/56] 849116
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Levenhuk Blitz 70s BASE 77100 Инструкция к Levenhuk Blitz 114 BASE онлайн [12/56] 849116

Levenhuk Blitz 114 BASE 77103 Инструкция к Levenhuk Blitz 114 BASE онлайн [12/56] 849109
12
Levenhuk Blitz BASE Telescopes
EN
All parts of the telescope will arrive in one box. Be careful when unpacking it. We recommend keeping
the original shipping containers. In the event that the telescope needs to be shipped to another location,
having the proper shipping containers will help ensure that your telescope survives the journey intact.
Be sure to check the box carefully, as some parts are small. All screws should be tightened securely to
eliminate exing and wobbling, but be careful not to overtighten them, as that may strip the threads.
During assembly (and anytime, for that matter), do not touch the surfaces of the optical elements with
your ngers. The optical surfaces have delicate coatings on them that can easily be damaged if touched.
Never remove lenses or mirrors from their housing, or the product warranty will be null and void.
Tripod assembly
• Slowly loosen the tripod locking knobs and gently pull out the lower section of each tripod leg.
Tighten the screws to hold the legs in place (except for Blitz 70s BASE) (g. 2).
• Spread the tripod legs apart to stand the tripod upright.
• Adjust the height of each tripod leg until the tripod head is properly leveled. Note that the tripod legs
may not be the same length when the mount is leveled (except for Blitz 70s BASE).
• Place the accessory tray on top of the bracket, and secure it with thumbscrews from underneath or
secure the accessory tray with one screw in the middle of the tray (except for Blitz 50 BASE,
Blitz 70s BASE).
Mount assembly
Mount without a fork (g. 3a):
• Remove the altitude lock knob from the mount head.
• Place the telescope optical tube on the altazimuth mount so that the hole in the optical tube lines up
with the hole in the mount head.
• Insert the altitude lock knob through the mount head and optical tube. Make sure the hole is clear all the
way through before tightening the knob. Secure the altitude lock knob.
Mount without a fork (g. 3b):
• The telescope tube has a mounting tab on its underside. Place this tab into the slot on the tripod top.
• Tighten the knurled knob on the tripod head to attach the tube onto the tripod.
• Screw the altitude slow-motion control into the threaded socket at the rear of the mount.
Fork mount (g. 3c):
• Remove the locking screw from the slow-motion control rod.
• Insert the rod into the hole on the side of the fork mount.
• Place the telescope tube between fork arms so that holes on the tube match the arm holes. Fasten
the telescope tube to the mount with thumbscrews.
• Fasten the other end of the rod to the telescope tube by inserting the screw through shaft and tube
holes and tightening it.
Optical accessories assembly
Your telescope can be equipped with additional accessories, such as eyepieces, diagonal mirror or prism, or
a Barlow lens. The accessories should be installed in well-dened ordering.
Refractors (g. 1a, 1b, 1c): Loosen the focuser thumbscrew. Insert the diagonal mirror into the focuser
tube and retighten the thumbscrew to hold the diagonal mirror in place (g. 5a). Then, insert the desired
eyepiece into the diagonal mirror and secure it by retightening the thumbscrew. If a Barlow lens is needed,
install it between the diagonal mirror and the eyepiece. You can use the erecting eyepiece to get a direct
image.
Reectors (g. 1d): Loosen the focuser thumbscrew and take o the plastic cap from the focuser tube.
Insert the selected eyepiece and secure it by retightening the thumbscrew (g. 5b). If a Barlow lens is
needed, install it between the focuser and the eyepiece.
CAUTION! Never look directly at the Sun — even for an instant — through your telescope or nderscope without
a professionally made solar lter that completely covers the front of the instrument, or permanent eye damage
may result. To avoid damage to the internal parts of your telescope, make sure the front end of the nderscope
is covered with aluminum foil or another non-transparent material. Children should use the telescope under adult
supervision only.

Похожие устройства

Скачать