First 1000 Вт/2000 Вт, холодный воздух, 25 м2, термостат, белый FA-5568-2 Инструкция онлайн [2/14] 849817

First 1000 Вт/2000 Вт, холодный воздух, 25 м2, термостат, белый FA-5568-2 Инструкция онлайн [2/14] 849817
HEAT SETTING (see picture 2):
The fan heater incorporates a rotation switch
you can select the different air by turning the
switch clockwise to:
O OFF
COOL AIR
I WARM AIR (1000W)
II WARM AIR (2000W)
THERMOSTAT:
When the convector is switched on.
1. Turn the thermostat knob in a clockwise
direction to the max. position.
2. Once the room temperature is reached
the desired temperature, turn the
thermostat knob slowly in an anti-
clockwise direction unit a "click” sound
and that is the setting temperature. Now,
the convector is switched off and the
indicators lights off.
3. The convector will automatically maintain
the set temperature. It will switch on when
the room temperature is below and switch
off if above the setting.
4. The indicator shows that the convector is
switched on.
SECURITY SYSTEM:
The fan heater is equipped with
overheating shut-off which switchs, if
the temperature inside the appliance
exceeds the normal running temperature
heating element product will automatically
stop working, the motor will continue
to operate, the internal heat shed. This
protective device applies only to the
appliance itself and has no influence on
room temperature regulation.
If overheating occurs, remove the plug
from socket, push buttons to switch the
convector off and let it cool down for
at least 10 minutes. Put the plug in the
socket and switch the heater on.
If you still notice the same defect above
mentioned remove the plug from socket
and have the convector serviced by
authorized service personal only.
MAINTENANCE:
The fan heater only needs regular
cleaning on the outside.
Before you clean the unit, turn the switch
to OFF. Remove the plug from socket and
wait until the fan heater cool down.
Use a damp cloth to wipe the heater
housing.
Do not use water, detergents, abrasive
cleaning liquids or chemical agents
(alcohol, gasoline etc.) to clean the unit.
TECHNICAL CHARACTERISTICS
220-240V • 50Hz • 2000W
This marking indicates that this product
should not be disposed with other
household wastes throughout the EU. To
prevent possible harm to the environment or
human health from uncontrolled waste
disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To
return your used device, please use the
return and collection systems or contact the
retailer where the product was purchased.
They can take this product for environmental
safe recycling.
3
ENGLISH
2
ENGLISH
INSTRUCTION MANUAL
Thank you very much for your purchase
of our Fan heater.
Please read the instruction manual
carefully and keep it for future use.
IMPORTANT INSTRUCTIONS
When using electrical appliances, basic
precautions should always be followed
to reduce the risk of fire, electrical shock,
burns and other injury, including the
following:
1. Study this instruction manual carefully
before using the product.
2. The device is only intended for private
and not for any commercial use.
3. Remove the unit from its packaging and
check to make sure it is in good condition
before using.
4. Do not let children play with parts of the
packing (such as plastic bags).
5. Check the household voltage to ensure it
matches the fan’s rated specification.
6. Check the power cord and plug carefully
before use to make sure that they are not
damaged.
7. Before unplugging the power cord, be
sure to turn off the power. When touching
the unit, be sure your hands are dry to
prevent from electric shock.
8. Do not use near or point the heater to
furniture, curtains or other inflammable
objects. Keep back of fan heater min.
15cm away from walls or objects to allow
free airflow.
9. Do not block air intakes or exhaust in any
manner to prevent a possible fire.
10. Do not use or leave the fan heater
unattended when children, old or disabled
people are present.
11. Always unplug heater when not in use.
12. Prevent water from getting into the
housing of the heater during operation
or in storage. Hazard of electric shock.
Always store in dry area with no moisture.
13. Do not use in places where there are gas,
paint or other inflammable goods and
objects
14. This heater is not intended for use in
bathrooms, laundry areas and similar
indoor locations. Never locate the heater
where it may fall into a bath tub or other
bodies of water.
15. Do not run the cord under carpeting. Do
not cover cord with throw rugs,runners or
the like. Arrange cord away from traffic
area and where it will not be tripped over.
16. Do not use a soft surface, like a bed,
where openings may become blocked.
17. Use this heater only as described in this
manual. Any other uses not recommended
by the manufacturer may cause fire,
electric shock, or injury to persons and
may void warranty.
18. Avoid the use of an extension cord
because the extension cord may overheat
and cause a risk of fire.
19. Do not use outdoors.
20. This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision
or instruction concerning use of the
appliance by a person responsible for
their safety.
21. Children should be supervised to ensure
that they do not play with the appliance.
CAUTIONS
This appliance is not a toy.
This appliance is for household use only.
Do not immerse the unit in the water.
To avoid the risk of fire or electric shock do
not remove the housing by yourself.
Any servicing other than cleaning and
user maintenance should be performed
by an authorized service representative.
If the supply cord is damaged, it must be
replaced by a special cord or assembly
available from the manufacturer or its
service agent.
Repair should be done by an authorized
service personal only.
PARTS DESCRIPTION (see picture 1)
1. Thermostat
2. Heat select switch
3. Power indicator light
4. Handle
5. Air outlet
6. Air inlet

Похожие устройства

Скачать