Brayer 2000 Вт, напольный, электронный, ударопрочное стекло BR4884 Инструкция по эксплуатации онлайн [8/76] 849829

the feet (6) with the corresponding openings in the

bottom part of the unit body.

• Fix the feet (6) with the screws supplied with the unit.

• Turn over the unit and place it on an even steady

surface.

Wall mounting

ATTENTION! When using the convection fan heater

in the bathroom, position the unit so that the distance

from the nearest faucet is at least 60 cm, and in no case

should splashes of water fall on the body and inside the

body of the unit.

Before drilling holes in the wall, make sure that there

is no electrical wiring or other communications at this

place.

• When mounting the unit on the wall, the distance

from all sides of the unit body to any objects should

be at least 300 mm (pic. 2), the mains socket should

be below the level of the unit body and easy to

access.

• Do not use the feet (4) with the wheels (5) when

mounting the unit on the wall.

• Using the four mounting screws, secure the upper

brackets (g. 2).

• Unscrew the mounting screw on the bottom of the

appliance, install the bottom bracket and secure it

using the screw removed earlier. (Fig. 2).

• Insert the dowels (pic. 3) into the drilled holes and

tighten the xing screws so that the xing screw goes

into the bracket (6).

• Align the screw heads with the holes in the upper

brackets, slide the appliance down, make sure that

the convection fan heater hangs without distortion

• Mark the location for drilling the hole for the bottom

bracket (g. 4).

• Remove the appliance from the wall.

• Drill a hole with a diameter of 6 mm in the wall to the

required depth for mounting the bottom bracket

• Insert a dowel into the drilled hole.

• Align the screw heads with the holes in the upper

brackets, slide the appliance down, make sure the

convection fan heater is securely attached to the

upper brackets.

• Mount the bottom bracket with a screw, make sure

the convection fan heater is securely xed to the wall.

USING THE CONVECTION FAN HEATER

• Place the convection fan heater vertically on an even

dry moisture- and thermal-resistant surface, do not

place it horizontally and do not turn it over.

• Use only the feet (6) when placing the unit on the

oor.

• Do not place the convection fan heater on soft

surfaces, such as carpets with high pile, sofas or

beds.

• The distance between the convection fan heater and

the furniture should be at least 1 m.

Brayer 2000 Вт, напольный, электронный, ударопрочное стекло BR4884 Инструкция по эксплуатации онлайн [8/76] 849829

Похожие устройства