Levenhuk Wezzer BASE L80 78890 Инструкция к товару онлайн [5/50] 850048

Levenhuk Wezzer BASE L80 Thermohygrometer

The kit includes: base station, sensor, USB cable, user manual, and warranty.

Also required (not included):

2 AAA batteries for each sensor

2 AAA batteries for the base station

Caution! Please remember that mains voltage in most European countries is

220—240V. If you want to use your device in a country with a dierent mains

voltage standard, remember that use of a converter is absolutely necessary.

Getting started

Base station

• Connect the power cable to the device and the DC adapter (not included) via a

USB plug and connect to the AC power supply; or

• Open the battery compartment cover (12) and insert 2 batteries according to

the correct polarity. Close the cover.

NOTE! It is recommended to use an adapter for the continuous

operation of the base station, although battery power is also possible.

• Wait until the indoor temperature is displayed on the base station.

Sensor

Open the battery compartment cover (4) and insert 2 batteries according to the

correct polarity. Close the cover.

Sensor connection

Place the base station and the remote sensor within the eective transmission

range. If the values are not received from a channel, сheck the batteries and

try again. Check if there is any source of interference. When changing batteries,

replace the batteries rst in the base unit, and then in the sensor, to re-establish

the connection. If an adapter supplies power to any of the devices, briey

disconnect the power to that device when replacing the batteries. If you change

the batteries only in one of the devices (for example, in the sensor), the signal may

not be received correctly. The eective range may dier depending on the unit’s

position. Due to interference (various remote control devices, etc.), the maximum

distance between the base unit and the sensor may be signicantly reduced. In

such cases, we suggest moving the base unit and sensor a little.

NOTE! Although the sensor is weather resistant, never place it in direct

sunlight or in the rain or snow.