Zarges 3х8 48921 Инструкция к Zarges 44816 онлайн [7/72] 851499
![Zarges 3х8 48921 Инструкция к Zarges 44816 онлайн [7/72] 851499](/views2/2069545/page7/bg7.png)
1.6. Cleaning
Clean the product with a solution of water and a standard cleaning
agent.
1.7. Disposal
The product is made mainly of aluminium.
Dispose of the product components as follows:
2. Checking the ladders
• The product must be regularly inspected by a technical expert to
ensure that it is safe to operate. The technical expert is authorised
to carry out inspection by the operator and must have taken part
in the seminars prescribed by law in the country concerned.
• The inspection intervals must be appropriate for the specific
operating conditions. Inspection must be carried out at least
once a year.
• The inspection must be documented. Check sheets for inspection
of the products are available on the ZARGES homepage. After
successful inspection, attach the ZARGES inspection plate (Order
No. 828384 or 828385) to the product. The month and year in
which the next inspection is due must be clearly visible.
2.1. Inspection criteria
WARNING
Danger of slipping caused by water on the standing
surfaces!
Dry standing surfaces and holding devices thoroughly
after cleaning.
Aluminium: Recycling
Steel: Recycling
Plastic: Energy recovery (ladder feet, end caps,
webbings)
Beams Rungs/Steps/Platform
Deformation Deformation
Damage (e.g. cracks) Damage (e.g. cracks)
Sharp edges, splinters, burrs Sharp edges, splinters, burrs
Wear Connection to the beam
(flanging, screw connection,
riveted joint, weld seam)
Protective treatment (for
wood)
Wear (e.g. standing surface,
platform support)
Spreader Ladder feet/rollers
Completeness/fastening Completeness/fastening
Functionality Wear/Corrosion
Damage/Corrosion Functionality
Fittings Identification
Damage/Corrosion Operating instructions
(pictogram)
Completeness/fastening
Functionality
Wear
Lubrication (mechanical parts)
Accessories (e.g. beam extension, foot widening, wall support)
Completeness/fastening
Похожие устройства
- Zarges 3х9 44839 Инструкция к Zarges 44816
- Zarges 3х9 48922 Инструкция к Zarges 44816
- Zarges 3x10 49310 Инструкция к Zarges 44816
- Powerram серий ET3-340, усилие до 20 тонн Tri-section plate, 20 Ton capacity ET3-340 Инструкция к товару
- Алюмет Серия H3 5306 Инструкция к Алюмет Серия H3 5306
- Алюмет Серия H3 5307 Инструкция к Алюмет Серия H3 5306
- Алюмет Серия H3 5308 Инструкция к Алюмет Серия H3 5306
- Алюмет Серия H3 5309 Инструкция к Алюмет Серия H3 5306
- Алюмет Серия H3 5310 Инструкция к Алюмет Серия H3 5306
- Алюмет Серия H3 5311 Инструкция к Алюмет Серия H3 5306
- Алюмет Серия H3 5312 Инструкция к Алюмет Серия H3 5306
- Алюмет Серия H3 5313 Инструкция к Алюмет Серия H3 5306
- Алюмет Серия H3 5314 Инструкция к Алюмет Серия H3 5306
- Алюмет Серия HS3 6312 Инструкция по эксплуатации
- Алюмет Серия HS3 6313 Инструкция по эксплуатации
- Алюмет Серия HS3 6314 Инструкция по эксплуатации
- Алюмет Серия HS3 6315 Инструкция по эксплуатации
- KRAUSE STABILO 3 х 10 перекладин с дополнительной функцией 133762 Инструкция к Krause STABILO 133762
- KRAUSE STABILO 3 х 12 перекладин 133700 Инструкция к Krause STABILO 133762
- KRAUSE STABILO 3 х 14 перекладин 133724 Инструкция к Krause STABILO 133762