Makita 125 мм,1900 Вт GA5090X01 Инструкция онлайн [8/56] 855219

8 ENGLISH

ENGLISH (Original instructions)

SPECIFICATIONS

Model: GA4590 GA4591 GA4592 GA5090 GA5091 GA5092

Applicable grinding wheel Max. wheel diameter 115 mm 125 mm

Max. wheel thickness 7.2 mm

Applicable cut-o󰀨 wheel Max. wheel diameter 115 mm 125 mm

Max. wheel thickness 3.2 mm

Applicable wire wheel brush Max. wheel diameter 115 mm 125 mm

Max. wheel thickness 20 mm

Spindle thread M14 or 5/8″(country specic)

Max. spindle length 23 mm

No load speed (n

) / Rated speed (n) 11,500 min

-1

Overall length 326 mm 349 mm 326 mm 349 mm 326 mm

Net weight 2.6 -

3.8 kg

2.8 -

4.0 kg

2.6 - 3.8 kg 2.8 -

4.0 kg

2.6 -

3.8 kg

Safety class

/II

• Due to our continuing program of research and development, the specications herein are subject to change

without notice.

• Specications may di󰀨er from country to country.

• The weight may di󰀨er depending on the attachment(s). The lightest and heaviest combination, according to

EPTA-Procedure 01/2014, are shown in the table.

Symbols

The followings show the symbols which may be used

for the equipment. Be sure that you understand their

meaning before use.

Read instruction manual.

Wear safety glasses.

Always operate with two hands.

Do not use the wheel guard for cut-o󰀨

operations.

DOUBLE INSULATION

Only for EU countries

Due to the presence of hazardous compo-

nents in the equipment, used electrical and

electronic equipment may have a negative

impact on the environment and human

health.

Do not dispose of electrical and electronic

appliances with household waste!

In accordance with the European Directive

on waste electrical and electronic equip-

ment and its adaptation to national law,

used electrical and electronic equipment

should be collected separately and

delivered to a separate collection point

for municipal waste, operating in accor-

dance with the environmental protection

regulations.

This is indicated by the symbol of the

crossed-out wheeled bin placed on the

equipment.

Intended use

The tool is intended for grinding, sanding, wire brush-

ing, hole cutting and cutting of metal and stone materi-

als without the use of water.

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated and can, therefore, also be used

from sockets without earth wire.

Makita 125 мм,1900 Вт GA5090X01 Инструкция онлайн [8/56] 855219

Похожие устройства