Home
Главная
Braun
Утюги
SI9281BK 0127404105
Инструкция Страница: 11

Braun SI9281BK 0127404105 Инструкция онлайн [11/103] 855799

(A) Start ironing

Filling the water tank

• Make sure that the appliance is switched

off and unplugged.

• Fill the water tank with tap water by

holding the iron slightly inclined, taking

care not to exceed the “max” level. If you

have extremely hard water, we recom-

mend that you use a mixture of 50 % tap

water and 50 % distilled water.

• Attention: Never use distilled water

exclusively. Do not add any additives (e.g.

starch). Do not use condensation water

from a tumble dryer.

Ironing with steam

• Place the iron on its heel rest (9) and

plug in.

• The iron will start to heat up and the

temperature control LED (7) on the iron

will blink.

• Once the temperature has been reached,

the temperature control LED turns

permanently on. Thanks to the ultimate

iCare technology, it is possible to iron

with one temperature setting, which is

perfectly suitable for all garments, without

damaging even delicate garments.

Steam options:

• Continuous steam (normal)

Select the steam quantity by turning the

steam regulator (4) in a range from «1» to

«6». We recommend a medium steam

setting for regular ironing. Only when

ironing tough fabrics like linen, thick

cotton or jeans it is recommended to use

the maximum steam setting.

Note: While ironing, do not turn the steam

regulator beyond setting «6».

• Continuous steam (turbo)

When the steam regulator is positioned

anywhere between «0» and «6» it is

possible to activate the turbo function by

pressing the turbo steam button (5) in

order to emit the highest steam output

and remove stubborn creases.

Press the turbo steam button for not more

than 30 seconds.

• Steam shot

Prior to use, press the steam shot trigger

(6) 3 to 4 times to activate it.

• For a powerful boost of steam, press the

steam shot trigger at intervals of a few

seconds.

• It is possible to use the steam shot

function by holding the iron in a vertical

position and pulling the steam shot

trigger. This is useful for removing creases

from hanging clothes, curtains etc.

Spray function

The spray function (3) produces a fine mist

that evenly moistens the fabric and makes it

easier to iron out creases on very tough

textiles.

Dry ironing

Set the steam regulator (4) on position «0»

(= steam off).

3D soleplate

The unique round shape of the 3D soleplate

ensures best gliding results on difficult parts

(e. g. buttons, pockets etc.) and in all

directions – even backwards.

(B) Auto off

For safety and reduced power consumption,

the auto-off function is automatically

activated when the iron is positioned

horizontally on its soleplate for about 1

minute or vertically on its heel rest for about

8 minutes.

• When the iron is in the auto-off mode the

temperature control LED (7) is blinking.

• To turn the iron on again, just move it

forward.

• Before start ironing again wait until the

temperature control LED is turned on.

• Unplug the iron and empty the water tank.

• Let the iron cool down before storing.

(D) Descaling

Preparation

1. Set the steam regulator (4) on position

«0» (= steam off).

2. Fill the water tank.

3. Plug in.

4. Wait until the temperature control LED

(7) turns permanently on and unplug the

iron. Hold the iron over the sink.

5. Turn the steam regulator clockwise

beyond steam stetting «6». When you

hear a click pull it out vertically until the

end of the spring appears. It must not be

removed completely.

Self clean

6. Move the appliance over the sink. Hot

water and steam will come out from the

soleplate along with the calc particles

from the steam chamber. Repeat 1.-6.

DLB253492_5712710611_SI9_UI_INT.indb 9 21.12.16 10:09

Braun SI9281BK 0127404105 Инструкция онлайн [11/103] 855799

Похожие устройства