Home
Главная
Vitek
Ультразвуковые
Midnight VT-2356 2356-VT-01
Инструкция по применению Страница: 5

Vitek Midnight VT-2356 2356-VT-01 Инструкция по применению онлайн [5/28] 855824

ENGLISH

NOT ENOUGH WATER

– When the water tank (2) and the process

chamber (7) are empty, the unit will switch

off, you will hear 3 short sound signals, and

all the indicators on the control panel will

start flashing. After some time the indicators

will go out.

– Remove the lid (1) from the water tank (2).

– Fill the tank (2) with the necessary amount of

water not exceeding the maximal level mark

(3) «МАКС», then install the lid (1) back to

its place.

– Switch the unit on for further operation.

CLEANING AND CARE

WARNING! Always switch the air humidifier off

and unplug it before maintenance works or clean-

ing.

Hard water causes appearance of mineral depos-

its (scale) in the process chamber (8) and in the

water tank (2) that leads to improper operation of

the unit. To avoid it:

– сlean the tank every three days, this will help

to prevent scale buildup in the tank and the

process chamber. It also prevents the bacte-

ria growth.

– use filtered and settled water. If tap water is

hard, it is recommended to mix tap water with

distilled water in proportion 1:1. If tap water is

too hard, mix it with distilled water in proportion

1:2 or use distilled water only.

– Change water in the water tank (2) twice a

week.

– Thoroughly wash the process chamber (7) and

the water tank (2) with neutral detergent solu-

tion twice a week.

– To clean the «sprayer» (9) from the mineral

deposit (scale) add 5-10 drops of detergent

on it and wait for approximately 10-15 minutes.

Remove the scale from the «sprayer» surface

with a soft brush, and then wash the process

chamber (7) with neutral detergent solution.

– Rinse the process chamber several times. Wipe

the process chamber with a soft cloth.

– Clean the air humidifier body (6) with a soft,

slightly damp cloth, and then wipe it dry.

– Clean the air inlet (4) and the air inlet grid on the

unit body (6) bottom as it becomes dirty.

– To clean the float (8), remove it. Lift the float

and remove it from the holder. Clean the float

(8) from mineral scale.

– Install the float (8) back to its place, making

sure there is no seizure in the axial movement

(rotation) of the float (8).

Notes:

– do not immerse the air humidifier body into

water or other liquids;

– do not use abrasives or solvents for cleaning

the sprayer (9);

– you can use a descaling agent for kettles as a

detergent for the sprayer (9) and the float (8),

strictly following the instruction for this sub-

stance.

STORAGE

– Pour the water out of the tank and make sure

that the process chamber and the sprayer are

dry before taking the unit away for storage.

– Do not keep water inside the tank (2) or the pro-

cess chamber (7) of the unit.

– Keep the air humidifier in a dry cool place away

from children and disabled persons.

TROUBLESHOOTING

Problem Possible causes Troubleshooting

No “mist” The unit is connected

improperly

Check if the power plug is inserted into the mains socket.

The unit is off Switch the unit on by pressing the button (15).

Water tank is empty

or there isn’t enough

water in the tank

Fill the water tank (2) with enough water.

Foreign smell

appears during

the operation

First use Disconnect the unit from the mains. Remove the water tank,

remove the lid and pour the water out of the water tank, then

leave the water tank in a dry cool place for 12 hours.

Dirty or stale water Unplug the unit, remove the water tank, remove the lid, pour

the water out of the water tank and clean the tank

(as described in the chapter “Cleaning and care”), then fill it

with clean water.

Vitek Midnight VT-2356 2356-VT-01 Инструкция по применению онлайн [5/28] 855824

Похожие устройства