Ergolux Elx-sk05-c03 серые металлик 15038 инструкция онлайн [8/10] 856764

WEIGHING INGREDIENTS

1. Place the scales on a flat steady surface.

2. To switch the scales on press the on/off/tare button (1) «ON/OFF» and wait till the zero

indications appear on the display (2).

Note:

– The symbols (0000) shown on the display (2) indicate that the scales is ready and you can start

weighing.

Note:

– If the indications on the display (2) are not equal to zero, press the button (1) «TARE», the

indications will be set to zero.

3. Select the required weight measurement units by pressing the button (3) "MODE". The following

symbols will appear on the display (2):

«g» – weight of product(s) in grams

«lb» – weight of product(s) in pounds

«oz» – weight of product(s) in ounces

The display (2) will show weight of ingredient(s) according to the selected measurement units.

Note:

– The scales will be switched off automatically after 2 minutes 30 seconds of non-operation.

CONSECUTIVE WEIGHING

If you want to measure the weight of several ingredients without removing the previous ones from

the platform (5) or from the bowl (7):

1. Place the scales on a flat steady surface.

2. To switch the scales on press the on button (1) «ON/OFF» and wait till the zero indications (000)

appear on the display (2).

Notes:

– If the indications on the display (2) are not equal to zero, press the button (4) «TARE», the

indications will be set to zero.

3. Select the necessary weight measurement units by touching the button (3)«MODE», the

following symbols will appear on the display (2):

«g» – weight of product(s) in grams (14);

«lb» – weight of product(s) in pounds (12);

«oz» – weight of product(s) in ounces (13);

4. Place the bowl (7) on the platform (5) and put the ingredients into the weighing bowl (7).

5. Press the button (4) «TARE», the display (2) weight indications will be set to zero.

6. Put the required quantity of the second ingredient into the bowl (7), checking the numeral

indications on the display (2).

7. Repeat steps 4, 5, 6 for consecutive weighing of the rest of ngredients.

8. Adding ingredients is available until the max. capacity (5 kg) is reached.

9. Remove the ingredients from the platform, the display (2) will show the total weight of all

ingredients and symbol (--).

Notes:

– Symbols «O-Ld» on the display (2) indicate that the maximal capacity of 5 kg has been exceeded.

Remove products from the scale immediately to prevent their damage.

– If the scale works improperly, try switching the power off. To do this, open the battery

compartment lid (6) and take out the batteries. After some time install the batteries back to its

place and switch the scale on.